The table of IP Reachable Addresses to networks, subnetworks or hosts either manually configured or learned from another protocol.
The indexes of the table are isisSysInstance, isisIPRADestType, isisIPRADest, isisIPRADestPrefixLen.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.3.37.1.8.1.1.1 |
isisIPRADestType |
INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)} |
not-accessible |
The type of this IP Reachable Address. This object follows the ManualOrAutomatic behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.8.1.1.2 |
isisIPRADest |
OCTET STRING{(4,4),(16,16)} |
not-accessible |
The destination of this IP Reachable Address. This is either a network address, subnetwork address or host address. This object follows the ManualOrAutomatic behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.8.1.1.3 |
isisIPRADestPrefixLen |
Unsigned32{(0,128)} |
not-accessible |
The length of the IP Netmask for Reachability Address. This object follows the ManualOrAutomatic behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.8.1.1.4 |
isisIPRANextHopType |
INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)} |
read-create |
The type of the IP next hop address. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.5 |
isisIPRANextHop |
OCTET STRING{(4,4),(16,16)} |
read-create |
The IP next hop to this destination. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.6 |
isisIPRAType |
INTEGER{manual(1),automatic(2)} |
read-create |
The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object follows the ManualOrAutomatic behavior. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.7 |
isisIPRAExistState |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
The state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.8 |
isisIPRAAdminState |
INTEGER{on(1),off(2)} |
read-create |
The administrative state of the IP Reachable Address. This object follows the AdminState and ManualOrAutomatic behaviors. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.9 |
isisIPRAMetric |
Integer32{(0,63)} |
read-create |
The metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.10 |
isisIPRAMetricType |
INTEGER{internal(1),external(2)} |
read-create |
Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.11 |
isisIPRAFullMetric |
Unsigned32{(0,4261412864)} |
read-create |
The wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior. |
The actually supported access is read-only. The actually supported value range is 0-4261412864. |
|
1.3.6.1.3.37.1.8.1.1.12 |
isisIPRASNPAAddress |
OCTET STRING{(0,20)} |
read-create |
The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.8.1.1.13 |
isisIPRASourceType |
INTEGER{static(1),direct(2),ospfv2(3),ospfv3(4),isis(5),rip(6),igrp(7),eigrp(8),bgp(9),other(10)} |
read-only |
The origin of this route. |
This object is implemented as defined in the corresponding MIB files. |