dot3adAggTable

1.2.840.10006.300.43.1.1.1.1.1

dot3adAggIndex

INTEGER

not-accessible

The unique identifier allocated to this Aggregator by the local System.

This attribute identifies an Aggregator instance among the subordinate

managed objects of the containing object. This value is read-only.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.2

dot3adAggMACAddress

OCTET STRING{(6,6)}

read-only

A 6-octet read-only value carrying the individual

MAC address assigned to the Aggregator.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.3

dot3adAggActorSystemPriority

INTEGER{(0,65535)}

read-write

A 2-octet read-write value indicating the priority value

associated with the Actor's System ID.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.4

dot3adAggActorSystemID

OCTET STRING{(6,6)}

read-only

A 6-octet read-write MAC address value used as a unique

identifier for the System that contains this Aggregator.

NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43,

only a single combination of Actor's System ID and System Priority are considered, and no

distinction is made between the values of these parameters for an Aggregator and the port(s) that

are associated with it; i.e., the protocol is described in terms of the operation of aggregation within

a single System. However, the managed objects provided for the Aggregator and the port both

allow management of these parameters. The result of this is to permit a single piece of equipment

to be configured by management to contain more than one System from the point of view of the

operation of Link Aggregation. This may be of particular use in the configuration of equipment

that has limited aggregation capability (see 43.6).

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.5

dot3adAggAggregateOrIndividual

INTEGER{true(1),false(2)}

read-only

A read-only Boolean value indicating whether the

Aggregator represents an Aggregate ('TRUE') or

an Individual link ('FALSE').

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.6

dot3adAggActorAdminKey

INTEGER{(0,65535)}

read-write

The current administrative value of the Key for the Aggregator.

The administrative Key value may differ from the operational

Key value for the reasons discussed in 43.6.2. This is a 16-bit,

read-write value. The meaning of particular Key values

is of local significance.

The actually supported access is read-only.

1.2.840.10006.300.43.1.1.1.1.7

dot3adAggActorOperKey

INTEGER{(0,65535)}

read-only

The current operational value of the Key for the Aggregator.

The administrative Key value may differ from the operational

Key value for the reasons discussed in 43.6.2.

This is a 16-bit read-only value. The meaning of particular Key

values is of local significance.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.8

dot3adAggPartnerSystemID

OCTET STRING{(6,6)}

read-only

A 6-octet read-only MAC address value consisting

of the unique identifier for the current protocol Partner of

this Aggregator. A value of zero indicates that there is no

known Partner. If the aggregation is manually configured, this

System ID value will be a value assigned by the local System.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.9

dot3adAggPartnerSystemPriority

INTEGER{(0,65535)}

read-only

A 2-octet read-only value that indicates the priority

value associated with the Partner's System ID. If the

aggregation is manually configured, this System Priority value

will be a value assigned by the local System.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.10

dot3adAggPartnerOperKey

INTEGER{(0,65535)}

read-only

The current operational value of the Key for the

Aggregator's current protocol Partner. This is

a 16-bit read-only value. If the aggregation is manually

configured, this Key value will be a value assigned by the

local System.

This object is implemented as defined in the corresponding MIB files.

1.2.840.10006.300.43.1.1.1.1.11

dot3adAggCollectorMaxDelay

INTEGER{(0,65535)}

read-write

The value of this 16-bit read-write attribute defines

the maximum delay, in tens of microseconds, that

may be imposed by the Frame Collector between

receiving a frame from an Aggregator Parser, and

either delivering the frame to its MAC Client or discarding

the frame (see 43.2.3.1.1).

This object is implemented as defined in the corresponding MIB files.