A table that controls selection of LLDP TLVs to be transmittedon individual ports.
The index of the table is lldpPortConfigPortNum.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.0.8802.1.1.2.1.5.4623.1.1.1.1.1 |
lldpXdot3PortConfigTLVsTxEnable |
BITS{macPhyConfigStatus(0),powerViaMDI(1),linkAggregation(2),maxFrameSize(3)} |
read-write |
The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'linkAggregation(2)' indicates that LLDP agent should transmit 'Link Aggregation TLV'. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. IEEE STATION AND MEDIA ACCESS CONTROL CONNECTIVITY DISCOVERY Std 802.1AB-2005 Copyright ? 2005 IEEE. All rights reserved. 143 The default value for lldpXdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. |
This object is implemented as defined in the corresponding MIB files. |