lldpXdot3RemPortTable

1.0.8802.1.1.2.1.5.4623.1.3.1.1.1

lldpXdot3RemPortAutoNegSupported

INTEGER{true(1),false(2)}

read-only

The truth value used to indicate whether the given port

(associated with remote system) supports Auto-negotiation.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.2

lldpXdot3RemPortAutoNegEnabled

INTEGER{true(1),false(2)}

read-only

The truth value used to indicate whether port

Auto-negotiation is enabled on the given port associated

with the remote system.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.3

lldpXdot3RemPortAutoNegAdvertisedCap

OCTET STRING{(2,2)}

read-only

This object contains the value (bitmap) of the

ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC

3636) which is associated with the given port on the

remote system.

This object is implemented as defined in the corresponding MIB files.

1.0.8802.1.1.2.1.5.4623.1.3.1.1.4

lldpXdot3RemPortOperMauType

Integer32{(0,2147483647)}

read-only

An integer value that indicates the operational MAU type

of the sending device.

This object contains the integer value derived from the

list position of the corresponding dot3MauType as listed in

in IETF RFC 3636 (or subsequent revisions) and is equal

to the last number in the respective dot3MauType OID.

For example, if the ifMauType object is dot3MauType1000BaseTHD

which corresponds to {dot3MauType 29}, the numerical value of

this field will be 29. For MAU types not listed in RFC 3636

(or subsequent revisions), the value of this field shall be

set to zero.

This object is implemented as defined in the corresponding MIB files.