A table of Sessions between the LDP Entities and LDP Peers. This table AUGMENTS the mplsLdpPeerTable. Each row in this table represents a single session.
The indexes of the table are mplsLdpEntityLdpId, mplsLdpEntityIndex, mplsLdpPeerLdpId.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.2.1.10.166.4.1.3.3.1.1 |
mplsLdpSessionStateLastChange |
TimeTicks |
read-only |
The value of sysUpTime at the time this Session entered its current state as denoted by the mplsLdpSessionState object. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.2 |
mplsLdpSessionState |
INTEGER{nonexistent(1),initialized(2),openrec(3),opensent(4),operational(5)} |
read-only |
The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.3 |
mplsLdpSessionRole |
INTEGER{unknown(1),active(2),passive(3)} |
read-only |
During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/LER was behaving in an active role or passive role during this session's establishment.
The value of unknown(1), indicates that the role is not able to be determined at the present time. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.4 |
mplsLdpSessionProtocolVersion |
Unsigned32{(1,65535)} |
read-only |
The version of the LDP Protocol which this session is using. This is the version of the LDP protocol which has been negotiated during session initialization. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.5 |
mplsLdpSessionKeepAliveHoldTimeRem |
INTEGER{(0,2147483647)} |
read-only |
The keep alive hold time remaining for this session. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.6 |
mplsLdpSessionKeepAliveTime |
Unsigned32{(1,65535)} |
read-only |
The negotiated KeepAlive Time which represents the amount of seconds between keep alive messages. The mplsLdpEntityKeepAliveHoldTimer related to this Session is the value that was proposed as the KeepAlive Time for this session. This value is negotiated during session initialization between the entity's proposed value (i.e., the value configured in mplsLdpEntityKeepAliveHoldTimer) and the peer's proposed KeepAlive Hold Timer value. This value is the smaller of the two proposed values. |
The actually supported value range is 9-65535. RO(Size list:9--65535) |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.7 |
mplsLdpSessionMaxPduLength |
Unsigned32{(1,65535)} |
read-only |
The value of maximum allowable length for LDP PDUs for this session. This value may have been negotiated during the Session Initialization. This object is related to the mplsLdpEntityMaxPduLength object. The mplsLdpEntityMaxPduLength object specifies the requested LDP PDU length, and this object reflects the negotiated LDP PDU length between the Entity and the Peer. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.166.4.1.3.3.1.8 |
mplsLdpSessionDiscontinuityTime |
TimeTicks |
read-only |
The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the specific instances associated with this session of any Counter32 object contained in the mplsLdpSessionStatsTable.
The initial value of this object is the value of sysUpTime when the entry was created in this table.
Also, a command generator can distinguish when a session between a given Entity and Peer goes away and a new session is established. This value would change and thus indicate to the command generator that this is a different session. |
This object is implemented as defined in the corresponding MIB files. |