msdpPeerTable

The (conceptual) table listing the MSDP speaker's peers.

The index of the table is msdpPeerRemoteAddress.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.3.92.1.1.5.1.1

msdpPeerRemoteAddress

IpAddress

not-accessible

The address of the remote MSDP peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.3

msdpPeerState

INTEGER{inactive(1),listen(2),connecting(3),established(4),disabled(5)}

read-only

The state of the MSDP TCP connection with this peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.4

msdpPeerRPFFailures

Counter32

read-only

The number of SA messages received from this peer that

failed the Peer-RPF check.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.5

msdpPeerInSAs

Counter32

read-only

The number of MSDP SA messages received on this

connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.6

msdpPeerOutSAs

Counter32

read-only

The number of MSDP SA messages transmitted on this

connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.7

msdpPeerInSARequests

Counter32

read-only

The number of MSDP SA-Request messages received on this

connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.8

msdpPeerOutSARequests

Counter32

read-only

The number of MSDP SA-Request messages transmitted on

this connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.9

msdpPeerInSAResponses

Counter32

read-only

The number of MSDP SA-Response messages received on this

connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.10

msdpPeerOutSAResponses

Counter32

read-only

The number of MSDP SA Response messages transmitted on

this TCP connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.11

msdpPeerInControlMessages

Counter32

read-only

The total number of MSDP messages, excluding encapsulated

data packets, received on this TCP connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.12

msdpPeerOutControlMessages

Counter32

read-only

The total number of MSDP messages, excluding encapsulated

data packets, transmitted on this TCP connection.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.13

msdpPeerInDataPackets

Counter32

read-only

The total number of encapsulated data packets received

from this peer.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.14

msdpPeerOutDataPackets

Counter32

read-only

The total number of encapsulated data packets sent to

this peer.

Discontinuities in the value of this counter can occur at

re-initialization of the management system, and at other

times as indicated by the value of

msdpPeerDiscontinuityTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.15

msdpPeerFsmEstablishedTransitions

Counter32

read-only

The total number of times the MSDP FSM transitioned into

the ESTABLISHED state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.16

msdpPeerFsmEstablishedTime

TimeTicks

read-only

This timestamp is set to the value of sysUpTime when a

peer transitions into or out of the ESTABLISHED state.

It is set to zero when the MSDP speaker is booted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.17

msdpPeerInMessageTime

TimeTicks

read-only

The sysUpTime value when the last MSDP message was

received from the peer. It is set to zero when the MSDP

speaker is booted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.18

msdpPeerLocalAddress

IpAddress

read-create

The local IP address used for this entry's MSDP TCP connection.

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.20

msdpPeerConnectRetryInterval

Integer32{(1,65535)}

read-create

Time interval, in seconds, for the [ConnectRetry-period] for this peer.

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.21

msdpPeerHoldTimeConfigured

Integer32{(0,0),(3,65535)}

read-create

Time interval, in seconds, for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), the MSDP connection is never torn down due to the absence of messages from the peer.

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.22

msdpPeerKeepAliveConfigured

Integer32{(0,0),(1,21845)}

read-create

Time interval, in seconds, for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the MSDP connection has been established.

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

1.3.6.1.3.92.1.1.5.1.23

msdpPeerDataTtl

Integer32{(0,255)}

read-create

The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer.

The actually supported access is read-only.

Currently, the

Set operation is not supported.

1.3.6.1.3.92.1.1.5.1.24

msdpPeerProcessRequestsFrom

INTEGER{true(1),false(2)}

read-create

This object indicates whether to process MSDP SA Request messages from this peer. If True(1), MSDP SA Request messages from this peer are processed and replied to (if appropriate) with SA Response messages. If False(2), MSDP SA Request messages from this peer are silently ignored. It defaults to False when msdpCacheLifetime is 0 and to True when msdpCacheLifetime is non-0. This object is deprecated because MSDP SA Requests were removed from the MSDP specification.

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

The restriction

is not made for a single SA message. After a random sa-request-policy

is successfully configured, the value of False is returned; otherwise,

the value of True is returned.

1.3.6.1.3.92.1.1.5.1.25

msdpPeerStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. msdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the msdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1).

The actually supported access is read-only.

Currently, the

Set operation is not supported. If the Set operation is performed

to set the value within the range defined by the protocol for this

object, an error code "Generic error" is returned.

When you

perform the Get operation on this object, 1 is returned.

1.3.6.1.3.92.1.1.5.1.26

msdpPeerRemotePort

Integer32{(0,65535)}

read-only

The remote port for the TCP connection between the MSDP

peers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.27

msdpPeerLocalPort

Integer32{(0,65535)}

read-only

The local port for the TCP connection between the MSDP

peers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.29

msdpPeerEncapsulationType

INTEGER{none(0),tcp(1)}

read-create

The encapsulation in use when encapsulating data in SA messages to this peer.

The actually supported access is read-only.

Currently, the Set operation is not supported. If the Set operation

is performed to set the value within the range defined by the protocol

for this object, an error code "Generic error" is returned.

When you perform the Get operation on this object, 1 is returned.

1.3.6.1.3.92.1.1.5.1.30

msdpPeerConnectionAttempts

Counter32

read-only

The number of times the state machine has transitioned

from INACTIVE to CONNECTING.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.31

msdpPeerInNotifications

Counter32

read-only

The number of MSDP Notification messages received from

this peer.

This object is deprecated because MSDP Notifications have

been removed from the spec.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.32

msdpPeerOutNotifications

Counter32

read-only

The number of MSDP Notification messages transmitted to

this peer.

This object is deprecated because MSDP Notifications have

been removed from the spec.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.33

msdpPeerLastError

OCTET STRING{(2,2)}

read-only

The last error code and subcode received via Notification

from this peer. If no error has occurred, this field is

zero. Otherwise, the first byte of this two-byte OCTET

STRING contains the O-bit and error code, and the second

byte contains the subcode.

This object is deprecated because MSDP Notifications have

been removed from the spec.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.92.1.1.5.1.34

msdpPeerDiscontinuityTime

TimeTicks

read-only

The value of sysUpTime on the most recent occasion at

which one or more of this entry's counters suffered a

discontinuity. See the DESCRIPTION of each object to see

if it is expected to have discontinuities. These

discontinuities may occur at peer connection

establishment.

If no such discontinuities have occurred since the last

reinitialization of the local management subsystem, then

this object contains a zero value.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read only when MSDP is enabled and MSDP peer relationship is established.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >