nqaJitterStatsProbeFailed

1.3.6.1.4.1.2011.5.25.111.6.9

nqaJitterStatsProbeFailed

• nqaAdminParaTargetAddressType
• nqaAdminParaTargetAddress
• nqaScheduleOperStatus
• nqaJitterStatsRTTSum
• nqaJitterStatsRTTSum2Low
• nqaJitterStatsRTTSum2High
• nqaJitterStatsRTTMin
• nqaJitterStatsRTTMax
• nqaJitterStatsPacketOutOfSequences
• nqaJitterStatsErrors
• nqaJitterStatsBusies
• nqaJitterStatsTimeouts
• nqaJitterStatsDrops
• nqaJitterStatsProbeResponses
• nqaJitterStatsSentProbes
• nqaJitterStatsMaxDelaySD
• nqaJitterStatsMaxDelayDS
• nqaJitterStatsJitterOut
• nqaJitterStatsJitterIn
• nqaJitterStatsOWSumSD
• nqaJitterStatsOWSumDS

Generated when a probe failure is detected when the

corresponding nqaAdminParaTrapGeneration object is set to

probeFailure(0) subject to the value of

nqaAdminParaTrapProbeFailureFilter. The object

nqaAdminParaTrapProbeFailureFilter can be used to specify the

number of successive probe failures that are required

before this notification can be generated.(Only for Jitter)

This object is implemented as defined in the corresponding MIB files.