nqaAdminParaTable

1.3.6.1.4.1.2011.5.25.111.2.2.1.1

nqaAdminParaTargetAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Only support the setting of value 'ipV4' and 'dns' ,do not support the setting of the node of the type of test :dhcp,lspPing(TE),lsp TraceRoute(TE),ldp(control word);When the nqaAdminCtrlType value is dnsAppl(11),the default value is dns(16);others,it's ipv4(1).

1.3.6.1.4.1.2011.5.25.111.2.2.1.2

nqaAdminParaTargetAddress

OCTET STRING{(0,255)}

read-write

Do not support the setting of the node of the type of test :dhcp,lspPing(TE),lsp TraceRoute(TE),ldp(control word);the length of string:0 to 230, the targetAddressType is ipv4,size list:1.0.0.0 to 223.255.255.255(if the type of test is trace or ftp and the of test's address is local address).

1.3.6.1.4.1.2011.5.25.111.2.2.1.3

nqaAdminParaTargetPort

Unsigned32{(0,65535)}

read-write

Do not support the setting of the node of the type of test:dhcp,icmp,snmp,dns,dlsw ,lspPing,lsp TraceRoute,pwe3ping,pwe3trace;trace default value:33434,size list:1 to 50000,the other default value:0,size list:0 to 50000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.4

nqaAdminParaSourceAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Only support the setting of value 'ipV4' and do not support the setting of the node of the type of test :dhcp,dns,,pwe3ping,pwe3trace.

1.3.6.1.4.1.2011.5.25.111.2.2.1.5

nqaAdminParaSourceAddress

OCTET STRING{(0,255)}

read-write

Do not support the setting of the node of the type of test:dhcp,dns,pwe3ping,pwe3trace; the length of string:0 to 230;Size list:1.0.0.0-D223.255.255.255.

1.3.6.1.4.1.2011.5.25.111.2.2.1.6

nqaAdminParaSourcePort

Unsigned32{(0,65535)}

read-write

Do not support the setting of the node of the type of test:dhcp,icmp,dns,trace,lspPing,lsp TraceRoute,pwe3ping,pwe3trace;Size list:0 to 50000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.7

nqaAdminParaMaxTtl

Unsigned32{(0,255)}

read-write

Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe.

The actually supported value range is 1-255.

1.3.6.1.4.1.2011.5.25.111.2.2.1.8

nqaAdminParaInitialTtl

Unsigned32{(1,255)}

read-write

Specifies the initial value of TTL.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.10

nqaAdminParaMaxFailures

Unsigned32{(1,255)}

read-write

The value of this object indicates the maximum number of

consecutive timeouts allowed before terminating a remote

traceroute request. A value of 255 (maximum hop

count/possible TTL value) indicates that the function

of terminating a remote traceroute request when a specific

number of successive timeouts are detected is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.11

nqaAdminParaDontFragment

INTEGER{true(1),false(2)}

read-write

This object enables setting of Don't Fragment (DF) flag in

the IP header for a probe. Use of this object enables

performing a manual PATH MTU test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.12

nqaAdminParaDataSize

Unsigned32

read-write

The actually supported value range is 0-8100.

Support the setting of the node of the type of test : traceRoute,udp,icmp,jitter,lspPing,pwe3ping,icmpjitter.

1.3.6.1.4.1.2011.5.25.111.2.2.1.13

nqaAdminParaDataFill

OCTET STRING

read-write

The actually supported value range is 1-230.

Support the setting of the node of the type of test : traceRoute,udp,icmp,jitter,lspPing,pwe3ping,icmpjitter.

1.3.6.1.4.1.2011.5.25.111.2.2.1.14

nqaAdminParaIfIndex

Integer32{(0,2147483647)}

read-write

Specified the source interface or tunnel, from which probes

of the test instance are sent. The value zero implies that the

object is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.15

nqaAdminParaByPassRouteTable

INTEGER{true(1),false(2)}

read-write

The purpose of this object is to optionally enable bypassing

the route table. If enabled, the remote host will bypass the

normal routing tables and send directly to a host on an attached

network. If the host is not on a directly-attached network, an

error is returned. This option can be used to perform the

ping/traceroute operation to a local host through an interface

that has no route defined (e.g., after the interface was dropped

by routed).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.17

nqaAdminParaProbeCount

Unsigned32{(1,65535)}

read-write

The actually supported value range is 1-15.

Do not support the setting of the node of the type of test: ftp,dns.

trace size list:1 to 10,the other size list:1 to 15.

1.3.6.1.4.1.2011.5.25.111.2.2.1.18

nqaAdminParaTrapGeneration

BITS{probeFailure(0),testFailure(1),testCompletion(2),overRtdThreshold(3),overOwdThresholdSd(4),overOwdThresholdDs(5),overJitterThresholdSd(6),overJitterThresholdDs(7),resultChangePacked(9)}

read-write

Switch of notification. Determine whether and how to send notifications

for the test instance:

- probeFailure(0) - Generate a PathChange notification when the current

path varies from a previously determined path.

- testFailure(1) - Generate a TestFailed notification when the full

path to a target cannot be determined.

- testCompletion(2) - Generate a TestCompleted notification when the path

to a target has been determined.

- overRtdThreshold(3) - Generate an Overthreshold of RTD notification when

the statistic results exceed threshold.

- overOwdThresholdSd(4) - Generate an Overthreshold of OWD-SD notification

when the statistic results exceed threshold.

- overOwdThresholdDs(5) - Generate an Overthreshold of OWD-DS notification

when the statistic results exceed threshold.

- overJitterThresholdSd(6) - Generate an Overthreshold of Jitter-SD notification

when the statistic results exceed threshold.

- overJitterThresholdDs(7) - Generate an Overthreshold of Jitter-DS notification

when the statistic results exceed threshold.

- resultChangePacked(9) - Generate a packed trap when test result is changed. No

more than two traps will be sent in one second and each trap contains at most ten

records.

The value #0x00 indicates disable all notifications.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.19

nqaAdminParaTrapProbeFailureFilter

Unsigned32{(1,15)}

read-write

Specifies the condition when to trigger an nqaProbeFailed notification.

When the number of consecutive failed probes violates the threshold indicated

by nqaAdminParaTrapProbeFailureFilter, a notification will be created. This

object is used together with nqaAdminParaTrapGeneration.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.20

nqaAdminParaTrapTestFailureFilter

Unsigned32{(1,15)}

read-write

Specifies the condition when to trigger an nqaTestFailed notification. When

the number of failed tests violates the threshold indicated by

nqaAdminParaTrapTestFailureFilter, a notification will be created. There are

usually several probes in each test. This object is used together with

nqaAdminParaTrapGeneration.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.21

nqaAdminParaDSField

Integer32{(0,255)}

read-write

The actually supported value range is 0-255.

Do not support the setting of the node of the type of test: trace,dns,dhcp,lspPing,lspTraceroute,pwe3ping,pwe3trace.

1.3.6.1.4.1.2011.5.25.111.2.2.1.22

nqaAdminParaDnsServerAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Only support the setting of value "ipv4";Support the setting of the node of the type of test: dns.

1.3.6.1.4.1.2011.5.25.111.2.2.1.23

nqaAdminParaDnsServerAddress

OCTET STRING{(0,255)}

read-write

Support the setting of the node of the type of test: dns;length range: 0~230;Size list when nqaAdminParaDnsServerAddressType is "ipv4":1.0.0.0 to 223.255.255.255.

1.3.6.1.4.1.2011.5.25.111.2.2.1.27

nqaAdminParaTestFailurePercent

Unsigned32{(0,100)}

read-write

The actually supported value range is 1-100.

Do not support the setting of the node of the type of test: dns,ftp,Traceroute,lspTraceRoute,pwe3trace.

1.3.6.1.4.1.2011.5.25.111.2.2.1.32

nqaAdminParaInterval

Integer32{(0,60000)}

read-write

The actually supported value range is 10-60000.

Support the setting of the node of the type of test:tcp,udp,icmp,snmp,jitter,lspPing,pwe3ping. Jitter default value:20(ms),the other :4000(ms);Jitter Size list: 20 to 60000(ms),the other size list :1000 to 60000(ms),the value must be a multiple of 1000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.33

nqaAdminParaNumPackets

Integer32

read-write

The actually supported value range is 1-3000.

Support the setting of the node of the type of test :jitter.

1.3.6.1.4.1.2011.5.25.111.2.2.1.34

nqaAdminParaVrfName

OCTET STRING{(0,255)}

read-write

The actually supported value range is 1-31.

Do not support the setting of the node of the type of test: dns,dhcp,lspPing,lspTraceRoute,pwe3ping.

1.3.6.1.4.1.2011.5.25.111.2.2.1.35

nqaAdminParaLspAddressType

INTEGER{ipv4(1),te(3),ipv4vpn(6),srte(8),srbe(9),bgp(12),srtepolicy(13),ring(100)}

read-write

Value list: 1: ipv4(1) 2: te(3),Support the setting of the node of the type of test :lspPing,lspTraceRoute.

1.3.6.1.4.1.2011.5.25.111.2.2.1.36

nqaAdminParaLspAddressMask

Integer32

read-write

The actually supported value range is 0-32.

Support the setting of the node of the type of test :lspPing(IP),lspTraceRoute(IP),pwe3ping,pwe3trace.

1.3.6.1.4.1.2011.5.25.111.2.2.1.37

nqaAdminParaLspIpAddress

OCTET STRING{(0,255)}

read-write

Support the setting of the node of the type of test :lspPing(IP),lspTraceRoute(IP),pwe3ping,pwe3trace,only support the setting of ip address 127/8(127.x.x.x 255.0.0.0).

1.3.6.1.4.1.2011.5.25.111.2.2.1.38

nqaAdminParaLspPWE3VcId

Unsigned32

read-write

The actually supported value range is 0-4294967295.

Support the setting of the node of the type of test:pew3ping; If the vc-type of pwe3ping is LDP.

1.3.6.1.4.1.2011.5.25.111.2.2.1.39

nqaAdminParaLspPWE3Type

INTEGER{fr(1),atmAal5Sdu(2),atmCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),atmNto1Vcc(9),atmNto1Vpc(10),ipLayer2(11),atm1to1Vcc(12),atm1to1Vpc(13),cep(16),satopE1(17),satopT1(18),satopE3(19),cesopsnBasic(21),ipInterworking(64)}

read-write

Size list: vlan(4),ethernet(5),hdlc(6),ppp(7),ip-layer2(11),satop-e1(17),cesopsn-basic(21),ipInterworking(64). Support the setting of the node of the type of test :PWE3Ping.

1.3.6.1.4.1.2011.5.25.111.2.2.1.40

nqaAdminParaLspPWE3Option

INTEGER{labelAlert(1),controlWord(2),normal(3)}

read-write

Size list: labelAlert(1),controlWord(2) and normal(3). Support the setting of the node of the type of test :PWE3Ping.

1.3.6.1.4.1.2011.5.25.111.2.2.1.41

nqaAdminParaLspPWE3RemoteVcId

Unsigned32

read-write

The actually supported value range is 0-4294967295.

Support the setting of the node of the type of test:pew3ping; If the vc-type of pwe3ping is LDP.

1.3.6.1.4.1.2011.5.25.111.2.2.1.42

nqaAdminParaLspPWE3RemoteAddress

OCTET STRING{(0,255)}

read-write

The remote IP address in PWE3 Ping test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.43

nqaAdminParaLspExp

Unsigned32{(0,7)}

read-write

Support the setting of the node of the type of test :lspPing,lspTraceRoute,pwe3ping,pwe3trace.

1.3.6.1.4.1.2011.5.25.111.2.2.1.44

nqaAdminParaLspReplyMode

INTEGER{noReply(1),udp(2),udpRouterAlert(3),levelControlChannel(4),udpviaVPLS(5),specifiedTunnelPath(6)}

read-write

The actually supported value range is 1-5.

Size list: noReply(1),udp(2),udpRouterAlert(3),levelControlChannel(4),udpviaVPLS(5)

1.3.6.1.4.1.2011.5.25.111.2.2.1.45

nqaAdminParaResultRowMax

Integer32

read-write

Specifies the maximum number of result records.

The actually supported value range is 1-10.

1.3.6.1.4.1.2011.5.25.111.2.2.1.46

nqaAdminParaHistoryRowMax

Integer32

read-write

Specifies the maximum number of history records.

The actually supported value range is 0-1000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.47

nqaAdminParaCreateHopsEntries

INTEGER{enable(1),disable(2)}

read-write

When set to enable (1), the result of each hop

will be kept in nqaResultsTable. The object applies

to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.48

nqaAdminParaLspVCType

INTEGER{ldp(1),bgp(2),bgpad(3)}

read-write

only support ldp.

1.3.6.1.4.1.2011.5.25.111.2.2.1.57

nqaAdminParaDistanceNodeType

INTEGER{macAddress(1),mepID(2)}

read-write

The destination of MAC ping(mac address or rmepid).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.58

nqaAdminParaMacAddress

OCTET STRING{(6,6)}

read-write

Mac address of the destination of MAC PING.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.59

nqaAdminParaRMepID

Unsigned32{(0,0),(1,8191)}

read-write

Rmepid of the destination of MAC PING.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.60

nqaAdminParaMDName

OCTET STRING{(0,43)}

read-write

Indicate the MD name in which the MAC Ping operated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.61

nqaAdminParaMAName

OCTET STRING{(0,45)}

read-write

Indicate the MA name in which the MAC Ping operated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.63

nqaAdminParaPathMtuStep

Integer32{(1,512)}

read-write

Specify the step of the path MTU test. If the last response

was received successful,the next packet's length will add

the step.

The actually supported value range is 1-512.

1.3.6.1.4.1.2011.5.25.111.2.2.1.64

nqaAdminParaPathMtuDiscoveryPathMtuMax

Integer32{(48,9198)}

read-write

Specify the max value of the discovery field in the path MTU test.

The actually supported value range is 48-9198.

1.3.6.1.4.1.2011.5.25.111.2.2.1.65

nqaAdminParaIcmpJitterMode

INTEGER{icmpTimestamp(1),icmpEcho(2)}

read-write

Select the type of ICMP packets to be sent in ICMP jitter and path

jitter test. The value can be icmpTimestamp(1) or icmpEcho(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.66

nqaAdminParaCodecType

INTEGER{notDefined(1),g711Alaw(2),g711Ulaw(3),g729A(4)}

read-write

To indicate the codec type to be used with jitter probe. This is

applicable only for the jitter probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.67

nqaAdminParaIcpifAdvFactor

Integer32{(0,20)}

read-write

The advantage factor depends on the type of access and how the service

is to be used. This object will be used while calculating the ICPIF

(Calculated Planning Impairment Factor) values.

Suggestion values:

|***************************************************|*******|

| Service |factor |

|***************************************************|*******|

| conventional wire-line | 0 |

|***************************************************|*******|

| mobility within Building | 5 |

|***************************************************|*******|

| mobility within geographical area | 10 |

|***************************************************|*******|

| access to hard-to-reach location | 20 |

|***************************************************|*******|

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.69

nqaAdminParaHardwareBased

INTEGER{enabled(1),disabled(2)}

read-write

Indicates that the hardware is enabled to send packets.

(The value range: enable:1;disable:2.The default value is disable(2))

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.76

nqaAdminParaVsiName

OCTET STRING{(0,31)}

read-write

Specify the name of the VSI(Virtual Switch Instance)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.77

nqaAdminParaVlanId

Integer32{(0,0),(1,4094)}

read-write

Specify the Vlan ID

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.78

nqaAdminParaLspTunnelType

INTEGER{main(0),hotstandby(1),primary(2)}

read-write

To indicate ping/trace which lsp tunnel.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.79

nqaAdminParaLspNextHopAddress

OCTET STRING{(0,255)}

read-write

Represents the address of nexthop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.80

nqaAdminParaLspVersion

INTEGER{draft6(1),rfc4379(2),ptnmode(3),compatiblemode(4)}

read-write

Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.81

nqaAdminParaRemoteAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Represents the address type of remote.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.82

nqaAdminParaRemoteAddress

OCTET STRING{(0,255)}

read-write

Represents the address of remote.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.83

nqaAdminParaTimeUnit

INTEGER{us(1),ms(2)}

read-write

The unit of the timestamp, ms or us.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.85

nqaAdminParaLifeTime

Unsigned32

read-write

The life time of test-case, s.

The actually supported value range is 0-4294967295.

1.3.6.1.4.1.2011.5.25.111.2.2.1.90

nqaAdminParaNextHopAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Specifies the address type of nexthop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.91

nqaAdminParaNextHopAddress

OCTET STRING{(0,255)}

read-write

Specifies the address of nexthop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.92

nqaAdminParaForwardingSimulationInboundIfIndex

Integer32{(0,2147483647)}

read-write

Specifies the inbound interface to simulate product forwarding.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.93

nqaAdminParaMeasure

INTEGER{unknown(0),delay(1),loss(2),throughput(3)}

read-write

This object is used to configure the test mode for generalflow test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.94

nqaAdminParaEthPriority

Unsigned32

read-write

This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario.

The actually supported value range is 0-7.

1.3.6.1.4.1.2011.5.25.111.2.2.1.95

nqaAdminParaMinRate

Unsigned32

read-write

This object is used to configure the minimum transmitting rate, in Kbps.

The actually supported value range is 0-100000000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.96

nqaAdminParaMaxRate

Unsigned32

read-write

This object is used to configure the maximum transmitting rate, in Kbps.

The actually supported value range is 0-100000000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.97

nqaAdminParaCevid

Unsigned32

read-write

This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario.

The actually supported value range is 1-4094.

1.3.6.1.4.1.2011.5.25.111.2.2.1.98

nqaAdminParaPevid

Unsigned32

read-write

This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario.

The actually supported value range is 1-4094.

1.3.6.1.4.1.2011.5.25.111.2.2.1.99

nqaAdminParaPrecision

Unsigned32

read-write

This object is used to configure the throughput precision.

The actually supported value range is 1-10000.

1.3.6.1.4.1.2011.5.25.111.2.2.1.100

nqaAdminParaSnmpCommunityRead

OCTET STRING{(0,32)}

read-write

Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.101

nqaAdminParaDatasizeList

OCTET STRING{(0,64)}

read-write

The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.104

nqaAdminGeneralflowTestBehavior

Unsigned32{(0,1)}

read-write

This object indicates the action performed on the non-test frames by the initiator.

0: Non-test frames will be discarded, and test frames will be forwarded.

1: Both non-test frames and test frames will be forwarded.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.114

nqaAdminParaPathType

INTEGER{main(1),bypass(2)}

read-write

To indicate ping request packet via which path.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.115

nqaAdminParaFragment

INTEGER{true(1),false(2)}

read-write

This object enables setting of Fragment (F) flag in

the IP header for a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.117

nqaAdminParaRmoteFecType

INTEGER{null(0),ldp(1)}

read-write

Specifies the remote FEC type. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.118

nqaAdminParaRmoteFecMask

Integer32

read-write

Specifies the address mask of remote FEC. The object apples to lspping and

lsptrace type test instance.

The actually supported value range is 0-32.

1.3.6.1.4.1.2011.5.25.111.2.2.1.119

nqaAdminParaRmoteFecIpAddress

OCTET STRING{(0,255)}

read-write

The IPV4 address of remote FEC. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.120

nqaAdminParaSrPolicyName

OCTET STRING{(0,32)}

read-write

The Policy name of of the SR-MPLS TE policy. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.121

nqaAdminParaSrPolicyEndPointAddrType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-write

Represents the address type of destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.122

nqaAdminParaSrPolicyEndPointIpAddress

OCTET STRING{(0,255)}

read-write

The destination of of the SR-MPLS TE policy. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.123

nqaAdminParaSrPolicyEndPointColor

Unsigned32{(0,4294967295)}

read-write

The color of of the SR-MPLS TE policy. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.124

nqaAdminParaSrPolicyBindingSid

Unsigned32{(0,0),(16,1048575)}

read-write

The binding sid of of the SR-MPLS TE policy. The object apples to lspping and

lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.125

nqaAdminParaDscp

INTEGER{true(1),false(2)}

read-write

Indicates that the DS field is defined as the DSCP in the IP packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.2.2.1.126

nqaAdminParaFlexAlgoId

Unsigned32{(0,0),(128,255)}

read-write

The flexible algorithm ID. The object apples to lspping and lsptrace type test instance.

This object is implemented as defined in the corresponding MIB files.