Description: This table describes result information of a test instance.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be LSPPING, or LSPTRACE.
The nqaMultiPathResultsIndex , nqaMultiPathResultsPathIndex and nqaMultiPathResultsHopIndex values must be 0.
The indexes of the table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaMultiPathResultsIndex, nqaMultiPathResultsPathIndex, nqaMultiPathResultsHopIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.1 |
nqaMultiPathResultsIndex |
Integer32{(0,'7fffffff'h)} |
not-accessible |
The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.2 |
nqaMultiPathResultsPathIndex |
Integer32{(0,128)} |
not-accessible |
The path index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.3 |
nqaMultiPathResultsHopIndex |
Integer32{(0,255)} |
not-accessible |
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.4 |
nqaMultiPathResultsCompletions |
INTEGER{noResult(0),success(1),failure(2)} |
read-only |
The status of test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.5 |
nqaMultiPathResultsTestAttempts |
Counter32 |
read-only |
The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.6 |
nqaMultiPathResultsCurHopCount |
Gauge32 |
read-only |
It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.7 |
nqaMultiPathResultsCurProbeCount |
Gauge32 |
read-only |
The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.8 |
nqaMultiPathResultsRTDOverThresholds |
Counter32 |
read-only |
The times of successful statistics test RTD (Round Trip Delay) over the threshold. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.9 |
nqaMultiPathResultsSumCompletionTime |
Counter32 |
read-only |
The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.10 |
nqaMultiPathResultsSumCompletionTime2Low |
Counter32 |
read-only |
The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.
Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.11 |
nqaMultiPathResultsSumCompletionTime2High |
Counter32 |
read-only |
The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.
See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.12 |
nqaMultiPathResultsCompletionTimeMin |
Gauge32 |
read-only |
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.13 |
nqaMultiPathResultsCompletionTimeMax |
Gauge32 |
read-only |
The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.14 |
nqaMultiPathResultsDisconnects |
Counter32 |
read-only |
The times of consecutive failures. For connectionless protocol type of test, this number should be zero. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.15 |
nqaMultiPathResultsTimeouts |
Counter32 |
read-only |
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.16 |
nqaMultiPathResultsBusies |
Counter32 |
read-only |
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.17 |
nqaMultiPathResultsNoConnections |
Counter32 |
read-only |
The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero.
This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP.
Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.18 |
nqaMultiPathResultsSequenceErrors |
Counter32 |
read-only |
The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero.
When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.19 |
nqaMultiPathResultsDrops |
Counter32 |
read-only |
The times probes of the test dropped due to sending or connecting failure. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.20 |
nqaMultiPathResultsAddressType |
INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)} |
read-only |
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.21 |
nqaMultiPathResultsAddress |
OCTET STRING{(0,255)} |
read-only |
The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.22 |
nqaMultiPathResultsProbeResponses |
Counter32 |
read-only |
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.23 |
nqaMultiPathResultsSentProbes |
Counter32 |
read-only |
The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.24 |
nqaMultiPathResultsLastGoodProbe |
OCTET STRING{(8,8),(11,11)} |
read-only |
Date and time when the last response was received for a probe. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.25 |
nqaMultiPathResultsLastGoodPath |
OCTET STRING{(8,8),(11,11)} |
read-only |
The date and time when the last complete path was determined. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.26 |
nqaMultiPathResultsTestFinished |
INTEGER{noFinish(0),finish(1)} |
read-only |
The status of test execution. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.27 |
nqaMultiPathResultsRttAvg |
Gauge32 |
read-only |
The average of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.28 |
nqaMultiPathResultsLostPacketRatio |
Gauge32 |
read-only |
The ratio of the packets lost to all packets sent in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.29 |
nqaMultiPathResultsSrPolicyPreference |
Gauge32 |
read-only |
The preference of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.30 |
nqaMultiPathResultsSrPolicyPathType |
INTEGER{main(1),backup(0),unknown(255)} |
read-only |
The path type of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.31 |
nqaMultiPathResultsSrPolicyProtocol |
INTEGER{pecp(10),bgp(20),local(30),unknown(255)} |
read-only |
The protocol of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.32 |
nqaMultiPathResultsSrPolicyNodeAddress |
OCTET STRING{(0,255)} |
read-only |
The destination address of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.33 |
nqaMultiPathResultsSrPolicyDiscriminator |
Gauge32 |
read-only |
The discriminator of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.34 |
nqaMultiPathResultsSrPolicySegListId |
Gauge32 |
read-only |
The id of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.16.1.35 |
nqaMultiPathResultsSrPolicyXcIndex |
Gauge32 |
read-only |
The xc index of the segment list. |
This object is implemented as defined in the corresponding MIB files. |
To access the latest test result, the following conditions needs to be satisfied.
The GET operation is performed.
The value of nqaResultsIndex, nqaMultiPathResultsPathIndex and nqaResultsHopIndex can only be 0.