nqaPathJitterStatsTable

1.3.6.1.4.1.2011.5.25.111.4.8.1.1

nqaPathJitterStatsIndex

Integer32{(1,'7fffffff'h)}

not-accessible

The index of path jitter statistics table, and the times of dispatching dependency tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.2

nqaPathJitterStatsHopIndex

Integer32{(1,255)}

not-accessible

The index of path jitter hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.3

nqaPathJitterStatsCompletions

INTEGER{noResult(0),success(1),failure(2)}

read-only

The status of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.4

nqaPathJitterStatsAddressType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-only

The destination address type in a hop of path jitter test,

and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.5

nqaPathJitterStatsAddress

OCTET STRING{(0,255)}

read-only

The destination address in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.6

nqaPathJitterStatsRtdOverThresholds

Counter32

read-only

The times of successful executions who's RTD over the threshold in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.7

nqaPathJitterStatsNumOfRtt

Counter32

read-only

The times that statistics RTT successfully in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.8

nqaPathJitterStatsRttSum

Counter32

read-only

The sum of RTTs in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.9

nqaPathJitterStatsRttSum2Low

Counter32

read-only

The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.10

nqaPathJitterStatsRttSum2High

Counter32

read-only

The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.11

nqaPathJitterStatsRttMin

Gauge32

read-only

The minimum of RTTs that successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.12

nqaPathJitterStatsRttMax

Gauge32

read-only

The maximum of RTTs that successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.13

nqaPathJitterStatsMinOfPositivesSD

Gauge32

read-only

The minimum of positive values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.14

nqaPathJitterStatsMaxOfPositivesSD

Gauge32

read-only

The maximum of positive values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.15

nqaPathJitterStatsNumOfPositivesSD

Counter32

read-only

The number of positive values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.16

nqaPathJitterStatsSumOfPositivesSD

Counter32

read-only

The sum of positive values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.17

nqaPathJitterStatsSum2OfPositivesSDLow

Counter32

read-only

The low order 32 bits of square sum of positive values of jitter that

measured from packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.18

nqaPathJitterStatsSum2OfPositivesSDHigh

Counter32

read-only

The high order 32 bits of square sum of positive values of jitter that

measured from packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.19

nqaPathJitterStatsMinOfNegativesSD

Gauge32

read-only

The minimum of negative values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.20

nqaPathJitterStatsMaxOfNegativesSD

Gauge32

read-only

The maximum of negative values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.21

nqaPathJitterStatsNumOfNegativesSD

Counter32

read-only

The number of negative values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.22

nqaPathJitterStatsSumOfNegativesSD

Counter32

read-only

The sum of negative values of jitter that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.23

nqaPathJitterStatsSum2OfNegativesSDLow

Counter32

read-only

The low order 32 bits of square sum of negative values of jitter that

measured from packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.24

nqaPathJitterStatsSum2OfNegativesSDHigh

Counter32

read-only

The high order 32 bits of square sum of negative values of jitter that

measured from packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.25

nqaPathJitterStatsMinOfPositivesDS

Gauge32

read-only

The minimum of positive values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.26

nqaPathJitterStatsMaxOfPositivesDS

Gauge32

read-only

The maximum of positive values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.27

nqaPathJitterStatsNumOfPositivesDS

Counter32

read-only

The number of positive values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.28

nqaPathJitterStatsSumOfPositivesDS

Counter32

read-only

The sum of positive values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.29

nqaPathJitterStatsSum2OfPositivesDSLow

Counter32

read-only

The low order 32 bits of square sum of positive values of jitter that

measured from packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.30

nqaPathJitterStatsSum2OfPositivesDSHigh

Counter32

read-only

The high order 32 bits of square sum of positive values of jitter that

measured from packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.31

nqaPathJitterStatsMinOfNegativesDS

Gauge32

read-only

The minimum of negative values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.32

nqaPathJitterStatsMaxOfNegativesDS

Gauge32

read-only

The maximum of negative values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.33

nqaPathJitterStatsNumOfNegativesDS

Counter32

read-only

The number of negative values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.34

nqaPathJitterStatsSumOfNegativesDS

Counter32

read-only

The sum of negative values of jitter that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.35

nqaPathJitterStatsSum2OfNegativesDSLow

Counter32

read-only

The low order 32 bits of square sum of negative values of jitter that

measured from packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.36

nqaPathJitterStatsSum2OfNegativesDSHigh

Counter32

read-only

The high order 32 bits of square sum of negative values of jitter that

measured from packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.37

nqaPathJitterStatsPacketLossSD

Counter32

read-only

The number of dropped packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.38

nqaPathJitterStatsPacketLossDS

Counter32

read-only

The number of dropped packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.39

nqaPathJitterStatsPacketOutOfSequences

Counter32

read-only

The number of packets that return out of sequence.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.40

nqaPathJitterStatsErrors

Counter32

read-only

The number of some other errors type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.41

nqaPathJitterStatsBusies

Counter32

read-only

The number of occasions when a path jitter operation could

not be initiated because an internal error.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.42

nqaPathJitterStatsTimeouts

Counter32

read-only

The number of occasions when a NQA operation was not completed

before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.43

nqaPathJitterStatsProbeResponses

Counter32

read-only

The number of responses received for the corresponding test.

The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.44

nqaPathJitterStatsSentProbes

Counter32

read-only

The value of this object reflects the number of packets sent for the corresponding test.

The value of this object MUST be reported as 0 when no probes have been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.45

nqaPathJitterStatsDrops

Counter32

read-only

The times probes of the test dropped due to sending failure.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.46

nqaPathJitterStatsTestFinished

INTEGER{noFinish(0),finish(1)}

read-only

The status of test execution.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.47

nqaPathJitterStatsMaxDelaySD

Gauge32

read-only

The maximum of all OWD (One Way Delay)

that measured from packets sent from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.48

nqaPathJitterStatsMaxDelayDS

Gauge32

read-only

The maximum of all OWD (One Way Delay)

that measured from packets sent from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.49

nqaPathJitterStatsRttAvg

Gauge32

read-only

The average of RTTs that were successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.50

nqaPathJitterStatsPacketLossRatio

Gauge32

read-only

The ratio of the packets lost to all packets sent in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.51

nqaPathJitterStatsAvgJitter

Gauge32

read-only

The average of jitter values that were successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.52

nqaPathJitterStatsAvgJitterSD

Gauge32

read-only

The average value of jitters that measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.53

nqaPathJitterStatsAvgJitterDS

Gauge32

read-only

The average value of jitters that measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.54

nqaPathJitterStatsJitterOut

OCTET STRING

read-only

jitter (RFC1889) at responder.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.55

nqaPathJitterStatsJitterIn

OCTET STRING

read-only

Jitter (RFC1889) at sender.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.56

nqaPathJitterStatsOwdOverThresholdsSD

Counter32

read-only

The number of tests that violate OWD (One Way Delay)

threshold from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.57

nqaPathJitterStatsPktLossUnknown

Counter32

read-only

The number of lost packets for which we can't determine the direction

in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.58

nqaPathJitterStatsNumOfOwd

Counter32

read-only

The number of OWDs that were successfully measured in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.59

nqaPathJitterStatsOwdSumSD

Counter32

read-only

The sum of OWDs that were successfully measured from packets sent from

source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.60

nqaPathJitterStatsOwdSumDS

Counter32

read-only

The sum of OWDs that were successfully measured from packets sent from

destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.61

nqaPathJitterStatsOwdOverThresholdsDS

Counter32

read-only

The number of tests that violate OWD (One Way Delay) threshold from destination to

source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.