A list of RIP Peers.
The indexes of the table are rip2PeerAddress, rip2PeerDomain.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.2.1.23.4.1.1 |
rip2PeerAddress |
IpAddress |
read-only |
The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.23.4.1.2 |
rip2PeerDomain |
OCTET STRING{(2,2)} |
read-only |
The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.23.4.1.3 |
rip2PeerLastUpdate |
TimeTicks |
read-only |
The value of sysUpTime when the most recent RIP update was received from this system. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.23.4.1.4 |
rip2PeerVersion |
INTEGER{(0,255)} |
read-only |
The RIP version number in the header of the last RIP packet received. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.23.4.1.5 |
rip2PeerRcvBadPackets |
Counter32 |
read-only |
The number of RIP response packets from this peer discarded as invalid. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.23.4.1.6 |
rip2PeerRcvBadRoutes |
Counter32 |
read-only |
The number of routes from this peer that were ignored because the entry format was invalid. |
This object is implemented as defined in the corresponding MIB files. |
Before reading this MIB table, run the rip mib-binding process-id command to bind the RIP process to SNMP.
Objects in this table have values only when RIP packets sent from neighbors are received.