Configuring the Time Synchronization Alarm Function

The time synchronization alarm function can be configured to help monitor the time synchronization status. When a time synchronization alarm is generated, the alarm information will be reported to the NMS for further troubleshooting and maintenance.

Context

Perform the following steps on a device:

Procedure

Run system-view
The system view is displayed.
Run any of the following commands:
- To configure the alarm threshold for the clock class value of a PTP source, run the ptp alarm-threshold clock-class clock-class-value command.
- To configure the alarm threshold for the absolute time offset of a PTP source, run the ptp alarm-threshold standard-time-offset time-offset-value command.
- To configure the alarm threshold of the peak value of the accumulated time offsets of a PTP source, run the ptp alarm-threshold time-offset-sum time-offset-sum command.
- To configure an alarm threshold for frequency offset at the physical layer, run the clock alarm-threshold frequency-offset frequency-offset-value command.
Run commit
The configuration is committed.