After configuring the rate limit for Address Resolution
Protocol (ARP) packets to be sent to the CPU, you can check the configuration.
Procedure
- Run the display arp-safeguard statistics slot slot-id command
to check ARP bidirectional isolation statistics on an interface board.
- Run the display arp rate-limit interface interface-type interface-number command
to check the ARP packet rate limit on an interface.
- Run the display
arp attack interface interface-type interface-number [ vlan-id vlan-id ]
[ history ] command to check ARP attack
information on an interface.
- Run the display
arp attack slot { slot-id | all } [ history ] command to check ARP
attack information on an interface board.