Binding a Policy Server to a Domain

Procedure

1. Run system-view

   The system view is displayed.

2. Run aaa

   The AAA view is displayed.

3. Run domain domain-name

   The domain view is displayed.

4. Run either of the following commands:
   • To bind a RADIUS server group to the domain, run the radius-server group group-name command.
   • To bind a Diameter server group to the domain, run the diameter-server group group-name command.

5. Run user-group group-name

   A user group is bound to the domain.

6. Run billing-server type { 1 | 2 }

   An accounting server type is specified.

   

   • Value 1 indicates that the accounting server supports dynamic switching of value-added service policy templates. After the policy server releases a new template, users are not charged with the corresponding tariff level, and a new accounting service is generated.
   • Value 2 indicates that the accounting server supports normal switching of value-added service policy templates. After the policy server releases a new template, users can only obtain the QoS parameters in it. Real-time accounting packets are sent after original bandwidth restrictions are updated.

7. Run commit

   The configuration is committed.