Example for Configuring IPoE Dual-Stack User Access (IA_NA)
This section provides an example for configuring IPoE dual-stack user access in IA_NA mode. When an IPoE dual-stack user connects to a BRAS, the BRAS implements RADIUS authentication and accounting, as well as assigns an IPv4 address to the user from the local address pool and an IPv6 address to the user through DHCPv6 (IA_NA). This allows the user to access the network.
Networking Requirements
On the network shown in Figure 1, an IPoE dual-stack user initiates a connection. DeviceA implements RADIUS authentication and accounting, assigns an IPv4 address to the user from the local address pool, and assigns an IPv6 address to the user through the DHCPv6 (IA_NA) option carrying an IA Address option. DeviceA uses the binding authentication mode. After the user is authenticated, it accesses the network through GE 0/1/2 on DeviceA. This scenario applies to wired user access.
Configuration Roadmap
The configuration roadmap is as follows:
Configure AAA schemes.
- Configure a loopback interface as the source interface for accessing servers.
Configure a RADIUS server group.
Configure a local IPv4 address pool.
Configure a local IPv6 prefix pool.
Configure a local IPv6 address pool, and bind the local IPv6 prefix pool to this address pool.
- Configure an AAA domain.
- Configure the BRAS to generate DUIDs in DUID-LLT mode.
Configure a BAS interface and an upstream interface.
Data Preparation
To complete the configuration, you need the following data:
Authentication scheme name and authentication mode
Accounting scheme name and accounting mode
RADIUS server group name, RADIUS authentication server's IP address and port number, and RADIUS accounting server's IP address and port number
Local prefix pool name
Assignable IPv6 prefixes and prefix lengths
Local address pool names
Domain name
Procedure
- Configure AAA schemes.
# Configure an authentication scheme.
<HUAWEI> system-view [~HUAWEI] sysname DeviceA [*HUAWEI] commit [~DeviceA] aaa [~DeviceA-aaa] authentication-scheme auth1 [*DeviceA-aaa-authen-auth1] authentication-mode radius [*DeviceA-aaa-authen-auth1] commit [~DeviceA-aaa-authen-auth1] quit
# Configure an accounting scheme.
[~DeviceA-aaa] accounting-scheme acct1 [*DeviceA-aaa-accounting-acct1] accounting-mode radius [*DeviceA-aaa-accounting-acct1] commit [~DeviceA-aaa-accounting-acct1] quit [~DeviceA-aaa] quit
- Configure a loopback interface as the source interface for accessing servers.
[~DeviceA] interface loopBack 0 [*DeviceA-LoopBack0] ipv6 enable [*DeviceA-LoopBack0] ip address 10.0.0.1 255.255.255.255 [*DeviceA-LoopBack0] ipv6 address 2001:db8:1::3 128 [*DeviceA-LoopBack0] ipv6 address auto link-local [*DeviceA-LoopBack0] commit [~DeviceA-LoopBack0] quit
- Configure a RADIUS server group.
[~DeviceA] radius-server group rd1 [*DeviceA-radius-rd1] radius-server authentication 10.6.55.55 1645 [*DeviceA-radius-rd1] radius-server accounting 10.6.55.55 1646 [*DeviceA-radius-rd1] radius-server source interface LoopBack 0 [*DeviceA-radius-rd1] commit [~DeviceA-radius-rd1] radius-server shared-key-cipher it-is-my-secret1 [*DeviceA-radius-rd1] commit [~DeviceA-radius-rd1] quit
- Configure a local IPv4 address pool.
[~DeviceA] ip pool pool2 bas local [*DeviceA-ip-pool-pool2] gateway 10.10.10.2 255.255.255.0 [*DeviceA-ip-pool-pool2] commit [~DeviceA-ip-pool-pool2] section 0 10.10.10.3 10.10.10.100 [~DeviceA-ip-pool-pool2] quit
- Configure a local IPv6 prefix pool.
[~DeviceA] ipv6 prefix pre1 local [*DeviceA-ipv6-prefix-pre1] prefix 2001:db8:3::/48 [*DeviceA-ipv6-prefix-pre1] commit [~DeviceA-ipv6-prefix-pre1] quit
- Configure a local IPv6 address pool, and bind the local IPv6 prefix pool to this address pool.
[~DeviceA] ipv6 pool pool1 bas local [*DeviceA-ipv6-pool-pool1] prefix pre1 [*DeviceA-ipv6-pool-pool1] commit [~DeviceA-ipv6-pool-pool1] quit
- Configure an AAA domain.
[~DeviceA] aaa [~DeviceA-aaa] domain huawei [*DeviceA-aaa-domain-huawei] authentication-scheme auth1 [*DeviceA-aaa-domain-huawei] accounting-scheme acct1 [*DeviceA-aaa-domain-huawei] radius-server group rd1 [*DeviceA-aaa-domain-huawei] commit [~DeviceA-aaa-domain-huawei] ip-pool pool2 [~DeviceA-aaa-domain-huawei] ipv6-pool pool1 [~DeviceA-aaa-domain-huawei] dns primary-ip 10.0.0.10 [*DeviceA-aaa-domain-huawei] dns second-ip 10.0.0.11 [*DeviceA-aaa-domain-huawei] commit [~DeviceA-aaa-domain-huawei] dns primary-ipv6 2001:db8:1::1 [~DeviceA-aaa-domain-huawei] dns second-ipv6 2001:db8:1::2 [~DeviceA-aaa-domain-huawei] quit [~DeviceA-aaa] quit
- Configure the BRAS to generate DUIDs in DUID-LLT mode.
[~DeviceA] dhcpv6 duid llt [*DeviceA] commit
- Configure a BAS interface and an upstream interface.
# Enable IPv6 and configure stateful address autoconfiguration on a sub-interface.
[~DeviceA] interface gigabitethernet 0/1/1.1 [*DeviceA-GigabitEthernet0/1/1.1] ipv6 enable [*DeviceA-GigabitEthernet0/1/1.1] ipv6 address auto link-local [*DeviceA-GigabitEthernet0/1/1.1] ipv6 nd autoconfig managed-address-flag [*DeviceA-GigabitEthernet0/1/1.1] commit
# Configure the sub-interface as a BAS interface used for IPoE user access.
[~DeviceA-GigabitEthernet0/1/1.1] user-vlan 3000 3799 qinq 2700 2955 [~DeviceA-GigabitEthernet0/1/1.1-vlan-3000-3799-QinQ-2700-2955] quit [~DeviceA-GigabitEthernet0/1/1.1] bas [~DeviceA-GigabitEthernet0/1/1.1-bas] access-type layer2-subscriber default-domain authentication huawei [*DeviceA-GigabitEthernet0/1/1.1-bas] authentication-method bind [*DeviceA-GigabitEthernet0/1/1.1-bas] authentication-method-ipv6 bind [*DeviceA-GigabitEthernet0/1/1.1-bas] ip-trigger [*DeviceA-GigabitEthernet0/1/1.1-bas] arp-trigger [*DeviceA-GigabitEthernet0/1/1.1-bas] commit [~DeviceA-GigabitEthernet0/1/1.1-bas] ipv6-trigger [~DeviceA-GigabitEthernet0/1/1.1-bas] nd-trigger [~DeviceA-GigabitEthernet0/1/1.1-bas] quit [~DeviceA-GigabitEthernet0/1/1.1] quit
# Configure an upstream interface.
[~DeviceA] interface gigabitethernet 0/1/2 [~DeviceA-GigabitEthernet0/1/2] ipv6 enable [*DeviceA-GigabitEthernet0/1/2] ip address 10.10.10.10 255.255.255.255 [*DeviceA-GigabitEthernet0/1/2] ipv6 address 2001:db8:5::/64 eui-64 [*DeviceA-GigabitEthernet0/1/2] ipv6 address auto link-local [*DeviceA-GigabitEthernet0/1/2] commit [~DeviceA-GigabitEthernet0/1/2] quit [~DeviceA] quit
- Verify the configuration.
# Display information about the address pool named pool2. The command output shows that the gateway address is 10.10.10.2 and the IP addresses in the address pool range from 10.10.10.3 to 10.10.10.100.
<DeviceA> display ip pool name pool2 Pool-Name : pool2 Pool-No : 2 Pool-constant-index: - Lease : 3 Days 0 Hours 0 Minutes Frameip-Lease-Manage: disable NetBios Type : N-Node Auto recycle : 30 Option 3 : Enable DNS-Suffix : - Dom-Search-List0: - Dom-Search-List1: - Dom-Search-List2: - Dom-Search-List3: - Option-Code 125 : enterprise-code : 2011, string: - Position : Local Status : Unlocked RUI-Flag : - Attribute : Private Gateway : 10.10.10.2 Mask : 255.255.255.0 Vpn instance : -- Unnumbered gateway: - Profile-Name : - Server-Name : - Total Idle : 98 Have Dhcp IP : 1 Timeouts : 0 Timeout Count : 0 Sub Option Count : 0 Option Count : 0 Force-reply Count: 0 Auto-Blocked Times: 0 IP Allocation Failures: 0 Codes: CFLCT(conflicted) Wait-Request-Time: -- IP Loose Check : 0 ------------------------------------------------------------------------------------------------------- ID start end total used idle CFLCT disable reserved static-bind delayed ------------------------------------------------------------------------------------------------------- 0 10.10.10.3 10.10.10.100 98 0 98 0 0 0 0 0 -------------------------------------------------------------------------------------------------------# Display information about the prefix pool named pre1. The command output shows that this is a local prefix pool and its prefix address is 2001:db8:3::.
<DeviceA> display ipv6 prefix pre1 ------------------------------------------------------------------------------ Prefix Name : pre1 Prefix Index : 0 Prefix constant index: - Prefix Type : LOCAL Prefix Address : 2001:DB8:3:: Prefix Length : 48 Reserved Type : NONE Valid Lifetime : 3 Days 0 Hours 0 Minutes Preferred Lifetime : 2 Days 0 Hours 0 Minutes IfLocked : Unlocked Vpn instance : - Free Prefix Count : 262143 Used Prefix Count : 0 Reserved Prefix Count: 0 Conflict Prefix Count: 0 Excluded Prefix Count: 0 Radius Used Total : 0 Radius Used Online : 0 Auto-Blocked Times : 0 IP Allocation Failures : 0 ------------------------------------------------------------------------------# Display information about the address pool named pool1. The command output shows that pool1 is a local address pool which is bound to the local prefix pool pre1.
<DeviceA> display ipv6 pool pool1 Pool name : pool1 Pool No : 0 Pool constant index: - Pool type : BAS LOCAL RUI-Flag : - Preference : 255 Renew time : 50 Rebind time : 80 Status : UNLOCKED Refresh interval : infinite Used by domain : 1 Dhcpv6 Unicast : disable Dhcpv6 rapid-commit: disable Dns list : - Dns server master : - Dns server slave : - AFTR name : - Wait-Request-Time : -- Warning Threshold : 80 Warning Exhaust Switch: FALSE ---------------------------------------------------------------------- Prefix-Name Prefix-Type ---------------------------------------------------------------------- pre1 LOCAL ----------------------------------------------------------------------# Check the configurations of the domain named huawei. The command output shows that the domain huawei is bound to the IPv6 address pool pool1 and IPv4 address pool pool2.
<DeviceA> display domain huawei ------------------------------------------------------------------------------ Domain-name : huawei Domain-state : Active Authentication-scheme-name : auth1 Accounting-scheme-name : acct1 Authorization-scheme-name : - Primary-DNS-IP-address : 10.0.0.10 Second-DNS-IP-address : 10.0.0.11 Primary-DNS-IPV6-address : 2001:DB8:1::1 Second-DNS-IPV6-address : 2001:DB8:1::2 Web-server-URL-parameter : No Portal-server-URL-parameter : No Primary-NBNS-IP-address : - Second-NBNS-IP-address : - Time-range : Disable Idle-cut direction : Both Idle-data-attribute (time,flow) : 0, 60 User detect interval : 0s User detect retransmit times : 0 Install-BOD-Count : 0 Report-VSM-User-Count : 0 Value-added-service : default User-access-limit : 1078272 Online-number : 0 Web-IP-address : - Web-IPv6-address : - Dns-redirect-IP-address : - Web-URL : - Web-auth-server : - Web-auth-state : - Web-server-mode : get Slave Web-IP-address : - Slave Web-IPv6-address : - Slave Web-URL : - Slave Web-auth-server : - Slave Web-auth-state : - Web-server identical-url : Disable Portal-server-IP : - Portal-URL : - Portal-force-times : 2 Portal-server identical-url : Disable Service-policy(Portal) : - Ds-lite IPv4 portal : Disable PPPoE-user-URL : Disable AdminUser-priority : 16 IPUser-ReAuth-Time : 300s mscg-name-portal-key : - Portal-user-first-url-key : - User-session-limit : 4294967295 Ancp auto qos adapt : Disable L2TP-group-name : - User-lease-time-no-response : 0s RADIUS-server-template : rd1 Two-acct-template : - RADIUS-server-pre-template : - - - RADIUS-server-llid-first-template: - HWTACACS-server-template : - Bill Flow : Disable Tunnel-acct-2867 : Disable Qos-profile-name inbound : - Qos-profile-name outbound : - Flow Statistic: Flow-Statistic-Up : Yes Flow-Statistic-Down : Yes Source-IP-route : Disable IP-warning-threshold : - IP-warning-threshold(Low) : - IPv6-warning-threshold : - IPv6-warning-threshold(Low) : - Multicast Forwarding : Yes Multicast Virtual : No Max-multilist num : 4 Multicast-profile : - Multicast-profile ipv6 : - Multicast-policy : - Multicast-bandwidth : - Multicast-bandwidth-level-1 : - IP-address-pool-name : pool2 IPv6-Pool-name : pool1 Quota-out : Offline Service-type : - User-basic-service-ip-type : -/-/- PPP-ipv6-address-protocol : Ndra IPv6-information-protocol : Stateless dhcpv6 IPv6-PPP-assign-interfaceid : Disable IPv6-PPP-NDRA-halt : Disable IPv6-PPP-NDRA-unicast : Disable Trigger-packet-wait-delay : 60s Peer-backup : Enable Reallocate-ip-address : Disable Cui enable : Disable Igmp enable : Enable CPE IP address : - Pim snooping enable : Enable L2tp-user radius-force : Disable Accounting dual-stack : Separate Radius server domain-annex : - Dhcp-option64-service : Disable Parse-separator : - Parse-segment-value : - Dhcp-receive-server-packet : - Http-hostcar : Disable Public-address assign-first : Disable Public-address nat : Enable Dhcp-user auto-save : Disable IP-pool usage-status threshold : 255 , 255 Select-Pool-Rule : gateway + local priority AFTR name : - Traffic-rate-mode : Separate Traffic-statistic-mode : Separate Rate-limit-mode-inbound : Car Rate-limit-mode-outbound : Car Service-change-mode : Stop-start DAA Direction : both Session Volumequota apply direction: both Nas logic-sysname : - Accounting exclude-type vlan : -/- Framed-ip urpf : Enable RA link-prefix : Disable Dslam connect speed : Disable Local backup : Enable DAA start accounting merge : disable DAA stop accounting merge : disable DAA interim accounting merge : disable DAA merged interim accounting interval(minute) : -- DAA merged interim accounting hash : disable EDSG stop accounting merge : disable EDSG interim accounting merge : disable EDSG merged interim accounting interval(minute): -- EDSG merged interim accounting hash : disable Stop dropped flow direction : - Interval dropped flow direction : - Edsg family-schedule inbound : Disable Edsg family-schedule outbound : Disable Layer2 IPoE ip-pool select-mode : Local Layer2 PPPoE ip-pool select-mode: Local access-trigger loose time(minute) : 0 access-trigger loose infinite-lease : Disable IPv6 address assignment mode : - LNS Tcp-Ack Priority-Car : Disable EDSG Tcp-Ack Priority-Car : Disable Include LNS-IPv6 : Disable Map priority : MAP-E Coa-zero-lease Dual-cut : Disable COA lease zero policy : - Authentication fail online domain : - ------------------------------------------------------------------------------
Configuration Files
# sysname DeviceA # radius-server group rd1 radius-server shared-key-cipher %^%#vS%796FO7%C~pB%CR=q;j}gSCqR-X6+P!.DYI@)%^%# radius-server authentication 10.6.55.55 1645 weight 0 radius-server accounting 10.6.55.55 1646 weight 0 radius-server source interface LoopBack0 # ip pool pool2 bas local gateway 10.10.10.2 255.255.255.0 section 0 10.10.10.3 10.10.10.100 # ipv6 prefix pre1 local prefix 2001:DB8:3::/48 # ipv6 pool pool1 bas local prefix pre1 # dhcpv6 duid 0001000125a7625df063f9761497 # aaa # authentication-scheme auth1 # authorization-scheme default # accounting-scheme acct1 # domain huawei authentication-scheme auth1 accounting-scheme acct1 radius-server group rd1 ip-pool pool2 ipv6-pool pool1 dns primary-ip 10.0.0.10 dns second-ip 10.0.0.11 dns primary-ipv6 2001:DB8:1::1 dns second-ipv6 2001:DB8:1::2 # # interface GigabitEthernet0/1/1 undo shutdown # interface GigabitEthernet0/1/1.1 ipv6 enable ipv6 address auto link-local user-vlan 3000 3799 qinq 2700 2955 ipv6 nd autoconfig managed-address-flag bas # access-type layer2-subscriber default-domain authentication huawei authentication-method bind authentication-method-ipv6 bind ip-trigger arp-trigger ipv6-trigger nd-trigger # # interface GigabitEthernet0/1/2 undo shutdown ipv6 enable ip address 10.10.10.10 255.255.255.255 ipv6 address 2001:DB8:5::/64 eui-64 ipv6 address auto link-local # interface LoopBack0 ipv6 enable ip address 10.0.0.1 255.255.255.255 ipv6 address 2001:DB8:1::3/128 ipv6 address auto link-local # return