Configuring RUI in Exclusive Address Pool Mode

In exclusive address pool mode, each RBP is bound to an address pool to control the advertisement and withdrawal of network segment routes of the address pool. RUI in exclusive address pool mode needs to be configured on an RBP backup group.

Context

In exclusive address pool mode, an address pool is configured for each interface and bound to an RBP. If an RBP is in the master state, the RBP advertises network segment routes of the address pool to the network side. The forwarding paths of network-to-user traffic are therefore controlled based on interfaces.

Procedure

RADIUS-authorized address pool
1. Run system-view
  The system view is displayed.
2. Run ipv6 pool pool-name bas local
  A local IPv6 address pool is created and its view is displayed.
3. Run quit
  Return to the system view.
4. Run ipv6 prefix prefix-name
  The IPv6 prefix pool view is displayed and prefixes are configured in the IPv6 prefix pool.
5. Run quit
  Return to the system view.
6. Run remote-backup-profile profile-name
  The remote backup profile view is displayed.
7. Run ipv6-pool source-pool-name include destination-pool-name [ node node-id ]
  A source IPv6 address pool is mapped to a destination address pool.
8. Run ipv6-pool pool-name
  An IPv6 address pool is configured and its view is displayed.
  
  The name of the IPv6 address pool is specified by destination-pool-name in the preceding step.
9. Run commit
  The configuration is committed.
Locally-authorized address pool
- Divide domains based on links and bind each domain to an address pool.
1. Run system-view
  The system view is displayed.
2. Run ipv6 prefix prefix-name local
  A local prefix pool is onfigured.
3. Run quit
  Exit the IPv6 prefix pool view.
4. Run ipv6 pool pool-name bas local
  A local IPv6 address pool is created and its view is displayed.
5. Run prefix prefix-name
  Prefixes are configured in the IPv6 prefix pool.
6. Run quit
  Exit the IPv6 address pool view.
7. Run aaa
  The AAA view is displayed.
8. Run domain domain-name
  The AAA domain view is displayed.
9. Run commit
  The configuration is committed.
10. Run ipv6-pool pool-name
  An IPv6 address pool is bound to a domain.
11. Run quit
  Exit the AAA domain view.
12. Run quit
  Exit the AAA view.
13. Run remote-backup-profile profile-name
  The remote backup profile view is displayed.
14. Run ipv6-pool pool-name
  An IPv6 address pool is configured.
15. Run commit
  The configuration is committed.
- Map a source IPv6 address pool to a destination address pool.
1. Run system-view
  The system view is displayed.
2. Run ipv6 pool pool-name bas local
  A local IPv6 address pool is created.
3. Run prefix prefix-name
  Prefixes are configured in the IPv6 prefix pool.
4. Run quit
  Exit the IPv6 address pool view.
5. Run aaa
  The AAA view is displayed.
6. Run domain domain-name
  The AAA domain view is displayed.
7. Run commit
  The configuration is committed.
8. Run ipv6-pool pool-name
  An IPv6 address pool is bound to a domain.
9. Run quit
  Exit the AAA domain view.
10. Run quit
  Exit the AAA view.
11. Run remote-backup-profile profile-name
  The remote backup profile view is displayed.
12. Run ipv6-pool source-pool-name include destination-pool-name [ node node-id ]
  A source IPv6 address pool is mapped to a destination address pool.
13. Run ipv6-pool pool-name
  An IPv6 address pool is configured.
  
  The name of the IPv6 address pool is specified by destination-pool-name in the preceding step.
14. Run commit
  The configuration is committed.