Configuring Encapsulation Modes for CU-106 Packets

You can configure destination MAC addresses of packets according to the actual networking.

Prerequisites

By default, CU-106 packets are encapsulated in MAC encapsulation mode.

Context

Perform the following operations on the T-BC:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ptp mac-egress destination-mac destination-mac

    The CU-106 packets to be sent from the interface is encapsulated in MAC encapsulation mode, and a destination MAC address is configured.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring CU-106
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >