This section describes how to configure automatic board power off under high temperature, protecting boards from high temperature.
The high-temperature working environment reduces the board lifespan. You can run the display temperature command to view the temperature alarm thresholds on each board. The alarm levels are minor, major, and fatal. When the board temperature is higher than a specific threshold, the corresponding level of alarm occurs. When the temperature is 5°C below the alarm threshold, the alarm is cleared. After this function is enabled, a board powers off automatically when temperatures of three or more monitoring nodes on the board are 5°C above the fatal high temperature alarm threshold.
In VS mode, this configuration process is supported only by the admin VS.
The system view is displayed.
Automatic board power off under high temperature is enabled.