This section describes how to configure the level-1 and level-2 notification thresholds and detection period for CPU overload.
Procedure
- Run system-view
The system view is displayed.
- Run set cpu-reliability first-recover first-recover-value first-alarm first-alarm-value second-recover second-recover-value second-alarm second-alarm-value period period-value [ slave | slot slotId ]
The level-1 and level-2 notification thresholds and their recovery thresholds as well as the detection period are set for CPU overload.
Follow-up Procedure
Run the display current-configuration command to check the level-1 and level-2 notification thresholds for CPU overload.