Configuring an eMDI Channel Group

The channels to be detected need to be configured before the eMDI detection solution is used.

Before configuring the multicast channels to be detected, create a channel group and add the multicast channels to the channel group.

Run system-view
The system view is displayed.
Run emdi
eMDI detection is enabled and the eMDI view is displayed.
Run emdi channel-group channel-group-name
An eMDI channel group is created or the view of an existing eMDI channel group is displayed.
Run either of the following commands:
- To add a specified multicast channel to the eMDI channel group in a BIER eMDI scenario, run the emdi channel channel-name source source-address group group-address vpn-instance vpn-instance-name sub-domain sub-domain-value bsl bsl-value command.
- To add a specified multicast channel to the eMDI channel group in other scenarios, run the emdi channel channel-name source source-address group group-address [ vpn-instance vpn-instance-name | vlan vlan-id | vsi vsi-name | bd bd-id | transit ] [ pt pt-value ] [ clock-rate clock-rate-value ] [ uncompressed ] command.
Run commit
The configuration is committed.