Binding a Channel Group to a Board Group

After an eMDI channel group and a board group are created, bind the channel group to the board group to achieve eMDI distributed board detection.

Context

As a distributed board detection solution, eMDI requires the binding of a channel group to a board group. After the channel group and board group are bound, the board NP in the board group performs real-time monitoring of the video streams of a specified channel in order to obtain detection indicators such as the packet loss rate and packet out-of-order rate.

Procedure

Run system-view
The system view is displayed.
Run emdi
The eMDI view is displayed.
Run either of the following commands:
- To bind an eMDI channel group to an eMDI board group in a BIER eMDI scenario, run the emdi bier bind lpu-group lpu-group-name command.
- To bind an eMDI channel group to an eMDI board group in other scenarios, run the emdi bind channel-group channel-group-name lpu-group lpu-group-name [ outbound ] command.
Run quit
Return to the system view.
(Optional) Run interface { interface-name | interface-type interface-number }
The interface view is displayed.
(Optional) Run emdi channel channel-name outbound
An eMDI channel is bound to the outbound interface.

Before binding an eMDI channel to the outbound interface, bind the corresponding eMDI channel group to an eMDI board group in the downstream direction.
Run commit
The configuration is committed.