(Optional) Configuring eMDI Detection on Ps

This section describes how to configure eMDI detection on Ps.

Context

Only NG MVPN networks support eMDI detection on video streams passing through Ps. eMDI detection is disabled by default. To enable eMDI detection on Ps, perform the following steps.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run emdi

    The eMDI view is displayed.

  3. Run emdi match-mpls-label enable

    eMDI detection on Ps is enabled.

  4. Run emdi channel-group channel-group-name

    An eMDI channel group is created or an existing channel group view is displayed.

  5. Run emdi channel channel-name source source-address group group-address transit

    A multicast channel is added to an eMDI channel group to enable eMDI detection on Ps.

    eMDI detection takes effect on Ps only after both the emdi match-mpls-label enable and emdi channel source source-address group group-address transit commands are run.

  6. Run commit

    The configuration is committed.

Parent Topic: Configuring Basic eMDI Detection Functions
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic