Configuring eMDI Alarm Thresholds and the Number of Alarm Suppression Times

This section describes how to configure alarm thresholds and the number of alarm suppression times when the frequency of reporting eMDI alarms needs to be changed.

Context

In addition to monitoring various indicators of video streams, the eMDI detection solution allows reporting of alarms to NMS. eMDI alarm triggering is determined by an alarm threshold and the number of alarm suppression times. If the alarm threshold is M and the number of alarm suppression times is N, when an indicator reaches M for N consecutive times, the device reports an eMDI alarm to the NMS. Therefore, to control the frequency at which eMDI alarms are reported, configure a proper alarm threshold and alarm suppression times.

If statistics are all below the threshold within 60 consecutive detection intervals, the alarm is automatically cleared.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run emdi

    The eMDI view is displayed.

  3. Run emdi alarm { rtp-lr | rtp-ser } { sd | hd | 4k } threshold threshold-value

    An alarm threshold for eMDI detection is configured.

  4. Run emdi alarm suppress times value

    The number of eMDI alarm suppression times is configured.

  5. Run commit

    The configuration is committed.

Parent Topic: Configuring eMDI Attributes
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >