(Optional) Setting a Bandwidth Mode for an Interface

An interface's bandwidth mode (1/10/25 Gbit/s) is restricted by its hosting device's hardware. Before setting a bandwidth mode for an interface, ensure that the hardware supports this function.

Context

When interconnecting interfaces that require the same bandwidth mode, you can run the port-mode command to set an interface's bandwidth.

In VS mode, this configuration task is supported only by the admin VS.

Perform the following steps on the router:

Procedure

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The GE interface view is displayed.
Set an interface's bandwidth.
- Run port-mode { 1ge | 10ge }
  
  The bandwidth mode for a GE interface is configured.
- Run port-mode { 1g | 10g | 25g}
  
  The bandwidth mode for a 25GE interface is configured.
Run commit
The configuration is committed.