Activating EVPN Interface Licenses on a Board

The device supports EVPN service activation by device or interface. If EVPN service resources have been purchased based on the number of ports in the current project, you must allocate these resources to specified ports.

Pre-configuration Tasks

Before activating EVPN interface licenses on a board, complete the following tasks:

The license file for the master main control board has been activated using the license active file-name command.

Context

In VS mode, this chapter applies only to the admin VS.

Procedure

Run system-view
The system view is displayed.
Run license
The license view is displayed.
Run active port-evpn slot slot-id card card-id port port-list
EVPN interface licenses are activated on the board.
Run commit
The configuration is committed.

Verifying the Configuration

Run the display license resource usage port-evpn { all | slot slot-id } [ active | deactive ] command to check whether EVPN interface licenses have been activated on boards.