Auth-Application-Id AVP

Description of AVP

AVP	Description
Auth-Application-Id	The Auth-Application-Id AVP (AVP Code 258) is of type Unsigned32 and is used to advertise support of the authentication and authorization of an application. The Auth-Application-Id must also be carried in all authentication and/or authorization messages that are defined in a separate Diameter specification and have an Application ID assigned. The maximum length of the Auth-Application-Id AVP supported by NetEngine 8000 F is 127 bytes. NOTE: On the NetEngine 8000 F, the Auth-Application-Id AVP indicates the specific application of a Diameter message, and the value of Auth-Application-Id used by PCC on a Gx interface is 16777238. The Auth-Application-Id AVP is a sub-AVP, which is used in the group AVP vendor-specific-application-id.

AVP

Description

Auth-Application-Id

The Auth-Application-Id AVP (AVP Code 258) is of type Unsigned32 and is used to advertise support of the authentication and authorization of an application. The Auth-Application-Id must also be carried in all authentication and/or authorization messages that are defined in a separate Diameter specification and have an Application ID assigned. The maximum length of the Auth-Application-Id AVP supported by NetEngine 8000 F is 127 bytes.

NOTE:

On the NetEngine 8000 F, the Auth-Application-Id AVP indicates the specific application of a Diameter message, and the value of Auth-Application-Id used by PCC on a Gx interface is 16777238.

The Auth-Application-Id AVP is a sub-AVP, which is used in the group AVP vendor-specific-application-id.

Reference Standards

RFC 3588 clause 6.8