(Optional) Configuring Share-Shaping for Port Queues

When the outbound interfaces of port queues with different priorities are the same main interface, you can perform share-shaping for the port queues using the same scheduling mode.

Context

Perform the following steps on a main interface:

Procedure

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run port share-shaping { af1 | af2 | af3 | af4 | be | cs6 | cs7 | ef } ^* [ pq | wfq weight weight-value | lpq ] { shaping-value | shaping-percentage shaping-percentage-value } [ pbs pbs-value ]
Share-shaping is configured for port queues.

If this command is configured for multiple times on an interface, the latest configuration overrides the previous configurations.

The port share-shaping and share-shaping (port queue view) commands are mutually exclusive on an interface.

This command cannot be configured on a trunk member interface, and the interface on which this command is configured cannot be added to a trunk interface.
Run commit
The configuration is committed.