Verifying the Configuration

After configuring interface-based HQoS, you can view information about queues and packet statistics on the interface.

Run the following commands to check the configuration.

Run the display flow-queue configuration [ verbose [ flow-queue-name ] ] command to check the configuration of an FQ profile.
Run the display flow-wred configuration [ verbose [ flow-wred-name ] ] command to check the configuration of a flow WRED object.
Run the display qos resource user-queue slot slot-id { inbound | outbound } command to check the usage of user queues on an interface board.
Run the display traffic buffer usage slot slot-id command to check the buffer usage.
In VS mode, this command is supported only by the admin VS.
Run the display qos default flow-queue statistics interface { interface-name | interface-type interface-number } outbound command to check FQ statistics on a specified channelized sub-interface.
Run the display qos information user-id user-id { inbound | outbound } command to check the CAR and queue traffic policing statistics of a specified user.
Run the display sub-port-queue statistics interface { interface-type interface-number | interface-name }outbound command to check statistics about sub-interface queues.
Run the display qos resource sub-port-queue slot slot-id { inbound | outbound } command to check the usage of sub-interface queue resources.
Run the display qos resource dp slot slot-id { inbound | outbound } command to check the usage of DP resources on an interface board.