Verifying the Configuration

After HQoS in priority-based 8-CoS mode is configured on an interface, you can view information about queues and packet statistics on the interface.

Context

Run the following commands to check the configuration.

Procedure

Run the display flow-queue configuration [ verbose [ flow-queue-name ] ] command to check the configuration of an FQ profile.
Run the display flow-wred configuration [ verbose [ flow-wred-name ] ] command to check the configuration of a flow WRED object.
Run the display user-group-queue configuration [ verbose [ group-name ] ] command to check the configuration and reference relationship of a GQ.
Run the display user-group-queue statistics [ name ] user-group-name statistics [ group group-name ] [ slot slot-id ] { inbound | outbound } command to check GQ statistics.
Run the display qos-profile configuration [ qos-profile-name ] command to check the configuration of a QoS profile.
Run the display qos-profile application { qos-profile-name } command to check the application of a QoS profile.
Run the display qos-profile statistics { vni vni-id | interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid | vid vid | ce-vid ce-vid | vid vid ce-vid ce-vid ] } { inbound | outbound } command to check QoS profile statistics.
Run the monitor qos-profile statistics interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid | vid vid-id | ce-vid ce-vid | vid vid-id ce-vid ce-vid ] { inbound | outbound } [ interval seconds [ repeat repeat ] ] command to monitor QoS profile statistics.
Run the display user-group-queue statistics interface { interface-name | interface-type interface-number } [ vlan vlan-id | pe-vid pe-vid ce-vid ce-vid ] { inbound | outbound } command to check GQ statistics.
Run the display qos resource user-group-queue slot slot-id { inbound | outbound } command to check the usage of GQs on an interface board.
Run the display qos resource user-queue slot slot-id { inbound | outbound } command to check the usage of user queues on an interface board.
Run the display traffic buffer usage slot slot-id command to check the buffer usage.
In VS mode, this command is supported only by the admin VS.
Run the display qos information user-id user-id { inbound | outbound } command to check the CAR and queue traffic policing statistics of a specified user.
Run the display qos-profile statistics vpn-instance vpnname { inbound | outbound } [ verbose ] command to check QoS profile statistics on all member interfaces in a VPN instance.
Run the display qos-profile statistics vsi vsi-name { inbound | outbound } [ verbose ] command to check the QoS traffic statistics of a specified VSI.
Run the display qos-profile statistics bridge-domain bd-id { inbound | outbound } [ verbose ] command to check the QoS traffic statistics of a specified BD.