After enabling or disabling the optical module laser, check its status.
Prerequisites
The optical module laser has been enabled or disabled as required.
Context
The following operations
affect the status of the optical module laser:
- Run the laser turn-on command to enable the optical module laser.
- Run the laser turn-off command to disable the optical module laser.
- Run the laser
autoshutdown enable command to configure the optical
module to disable the laser automatically if it detects a link failure.
- Run the shutdown command to deactivate the interface.
Procedure
- Run the display laser status { interface interface-type interface-number } command in any view to check the status of the optical module laser.