To configure FlexE services on a board, you must activate the FlexE interface license on the board first.
Pre-configuration Tasks
Before activating the FlexE interface license on a board, complete the following tasks:
- Run the license active file-name command to activate a specified license file on the main control board.
- Run the active port-basic slot slotid card cardid port port-list command to activate the interface-specific basic hardware license.
Procedure
- Run system-view
The system view is displayed.
- Run license
The license view is displayed.
- Run active port-slicing slot slotid card cardid port port-list
The FlexE interface license is activated on a specified board.
- Run commit
The configuration is committed.