Configuring a PHY Number for a FlexE Physical Interface

To ensure normal communication between interconnected devices, you need to configure the same PHY number for the FlexE physical interfaces on both of them.

Context

Different FlexE physical interfaces can be configured with the same PHY number. However, the FlexE physical interfaces with the same PHY number cannot be added to the same FlexE group, and a FlexE physical interface can be added to only one FlexE group.

Procedure

Run system-view
The system view is displayed.
Run interface interface-type interface-number
The view of a specified FlexE physical interface (for example, FlexE-50G 0/1/52) is displayed.
Run phy-number phy-number
A PHY number is configured for the FlexE physical interface.
(Optional) Run management-channel mode { union | section | shim-to-shim | shim-to-shim-op2 }
A management channel mode is configured for the FlexE physical interface.
(Optional) Run down-filter disable
Down interrupt suppression is disabled on the FlexE physical interface.
Run commit
The configuration is committed.