(Optional) Configuring a Mode for a FlexE Card

FlexE cards support timeslot and bandwidth modes. The bandwidth mode is recommended.

Timeslot mode: A timeslot number to be allocated to a FlexE client is statically specified when the client is configured.
Bandwidth mode: Only the needed bandwidth is specified when a FlexE client is configured, and the device automatically allocates the corresponding timeslot.

By default, the bandwidth mode is used for a FlexE card.

Run system-view
The system view is displayed.
Run slot slot-id
The slot view is displayed.
Run flexe config-mode card cardid { bandwidth | timeslot }
The bandwidth or timeslot mode is configured for a specified FlexE card.
Run commit
The configuration is committed.