Configuring Binding Authentication

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number

   The interface view is displayed.

3. Run bas

   The BAS interface view is displayed.

4. Run access-type layer2-subscriber

   The user access type is set to Layer 2 subscriber access.

5. Run default-domain pre-authentication domain-name

   The default pre-authentication domain is specified.

6. Run default-domain authentication [ force | replace ] domain-name

   The default authentication domain is specified.

7. Run authentication-method { { ppp | dot1x } * | bind }

   PPP authentication, 802.1X authentication, or binding authentication is configured.

   You can set authentication methods for only Layer 2 users on a BAS interface. Multiple authentication modes can be configured on an interface but you should note the following:

   • Web authentication conflicts with fast authentication.
   • Binding authentication conflicts with the other authentication modes.

8. Run commit

   The configuration is committed.