IPoE Access Configuration
This chapter describes how to configure IPoE access for service control and management.
In VS mode, this feature is supported only by the admin VS.
User Access is only supported on NetEngine 8000 F1A.
- Overview of IPoE Access
- This section describes basic concepts of IP over Ethernet (IPoE) access, helping you quickly configure IPoE access.
- Configuring an Authentication Mode for IPoE Access
- Authentication technologies allow a user terminal to be authenticated by submitting the username and password to the NetEngine 8000 F. The NetEngine 8000 F supports multiple authentication technologies.
- Configuring IPoE Access
- In IPoE access, users can access the Internet by sending packets, without the need to install any client dialup software for dialing in.
- Configuring IPoEv6 Access
- In IPoEv6 access, users can access the Internet by sending packets, without the need to install any client dial-up software for dialing in.
- Maintaining IPoE Access
- This section describes how to maintain IPoE access, including checking and clearing user login and logout statistics and information about users whose login request packets are limited.
- Configuration Examples for IPoE Access Authentication
- This section provides examples for configuring IPoE access authentication, including networking requirements, configuration notes, and configuration roadmap.