Checking BRAS Access Information

This section describes how to check BRAS access information, including user login and logout records as well as related configurations.

After configuring BRAS access, run the following display commands in any view to check BRAS access configurations.

Run the display web-auth-server configuration command to check the web authentication server configuration.
Run the display bas-interface command to check the configuration of all BAS interfaces or a specific one.
Run the display aaa online-fail-record command to check the login failure records.
Run the display aaa offline-record command to check the logout records.
Run the display aaa abnormal-offline-record command to check the abnormal logout records.
Run the display call rate command to check call put-through rates for all types of users.
Run the display access-user command in any view to check information about online users.
The protocol-statistics enable command run in the AAA view enables statistics collection about protocol packets, including ND, PPPoE, PPP, DHCPv4, and DHCPv6 packets.
Run the display user-flow-statistics [ domain domain-name ] command in any view to check users' uplink and downlink traffic statistics.
Run the display access trigger user-table command in any view to check information about users whose access packets are limited on a board.
Run the display access trigger board-limit-info command in any view to check information about users for whom a limit on the number of login request packets that can be sent to the main control board is configured.