After configuring IP address pools or pool groups, verify the configurations of all IP address pools or pool groups. You can also verify the configurations of a specified IP address pool or pool group.
Prerequisites
IP address pools or pool groups have been configured.
Procedure
- Run the display ip pool [ name pool-name [ section-num [ start-ip-address [ end-ip-address ] ] | all | used ] ] [ vpn-instance instance-name ] command to check the configurations of all IP address pools or a specified one.
- Run the display ip pool-group [ name group-name ] [ vpn-instance instance-name ] command to check the configurations of all IP address pool groups or a specified one.
- Run the display ip-pool pool-usage [ domain dname | pool-name [ pool-name ] ] command to check the address pool usage of all domains or a specified one.
- Run the display ip-pool max-ratio domain command to check the maximum address pool usage of each domain on the device.
- Run the display ip-pool pool-usage { upper-threshold | lower-threshold | all-threshold } command to check information about domains whose IP address pool usage exceeds a specified threshold.