This section describes how to configure the NetEngine 8000 F based on its role.
When a device acts as a DHCPv6 relay agent, see Configuring a DHCPv6 Relay Agent on the User Side.
When a device acts as a DHCPv6 server, perform the following operations to allow Layer 3 DHCPv6 users to request for IPv6 addresses from an IPv6 relay address pool.
The system view is displayed.
An IPv6 prefix pool is created, and the IPv6 prefix pool view is displayed.
The address pool is of the relay type, and the prefix pool must be configured to work in local mode.
An IPv6 address prefix is configured.
Return to the system view.
An IPv6 address pool is created, and the IPv6 address pool view is displayed.
The IPv6 address pool is bound to the IPv6 prefix pool.
The configuration is committed.