After configuring DHCPv6 (IA_NA+IA_PD) address allocation, verify the IPv6 address pool, IPv6 prefix pool, and domain configurations and the usage of the address pool bound to the domain.
Procedure
- Run the display ipv6 pool [ pool-name ] command to check the configurations of all IPv6 address pools or a specified one.
- Run the display ipv6 prefix [ prefix-name [ all | used ] ] command to check the configurations of all IPv6 prefix pools or a specified one.
- Run the display domain [ domain-name ] command to check the configurations of all domains or a specified one.
- Run the display ipv6-pool
pool-usage [ domain domain-name | pool-name [ pool-name ] ] command to check the address pool usage
of all domains or a specified one.
- Run the display ipv6-pool max-ratio domain command to check the maximum IPv6 address pool or prefix pool usage in each domain on the device.
- Run the display ipv6-pool pool-usage { upper-threshold | lower-threshold | all-threshold } command to check information about domains whose IPv6 address pool or prefix pool usage exceeds a specified threshold.