This section describes how to configure a VPN import policy for address pool subnet routes in order to achieve VPN-based automatic leaking of IPv6 address pool routes.
If the BAS user side and network side belong to different VPNs, you can configure the policy of VPN-based automatic address pool route leaking so that the address pool subnet routes in the user-side VPN can be imported to the network-side VPN. In this case, the interfaces in the network-side VPN routing table reside in the user-side VPN. Compared with static route configuration, configuring the automatic route leaking function reduces the inconvenience brought by updating configurations when the address pool subnet or VPN is updated.
The system view is displayed.
The device is configured to automatically import the address pool subnet routes from the source VPN to the destination VPN.
The configuration is committed.