This section describes how to verify the configurations of the L2TP group, session information, and the tunnel on the LAC after the LAC is configured and users go online.
Procedure
- Run the display l2tp-group [ group-name ] command to check the L2TP group configuration.
- Run the display l2tp session lac [ session-item session-id | source-ip source-ip-address | destination-ip destination-ip-address ] command to check information about the current LAC session.
- Run the display l2tp tunnel lac [ tunnel-item tunnel-id | tunnel-name remote-name ] command to check information about the tunnel on the LAC.
- Run the display l2tp tunnel [ lac slot slot-id ] [ tunnel-item tunnel-id | tunnel-name remote-name ] command to check information about L2TP tunnels.
- Run the display l2tp session { lac slot slot-id } [ session-item session-id | source-ip source-ip-address | destination-ip destination-ip-address ] command to check information about L2TP sessions.
- Run the display l2tp session-number lac [ source-ip source-ip-address [ vpn-instance vpn-instance-name ] ] command to check the number of LAC sessions established based on a specified source IPv4 address.
- Run the display l2tp statistics lac tunnel-item tunnel-id command to check statistics about LAC protocol packets based on a tunnel ID.