Activating L3VPN Interface Licenses for a CM Board

The device supports L3VPN service activation by device or interface. If L3VPN service resources have been purchased based on the number of ports in the current project, you must allocate these resources to specified ports.

Pre-configuration Tasks

Before configuring the L3VPN interface license function on a specified board, complete the following tasks:

The license file for the master main control board has been activated using the license active file-name command.
The interface-specific basic hardware licenses for the board have been activated in batches using the active port-basic slot slotid card cardid port port-list command.

Procedure

Run system-view
The system view is displayed.
Run license
The license view is displayed.
Run active port-l3vpn slot slot-id card card-id port port-list
L3VPN interface licenses are activated for the board.
Run commit
The configuration is committed.

Verifying the Configuration

Run the display license resource usage port-l3vpn { all | slot slot-id } [ active | deactive ] command to check whether L3VPN interface licenses have been activated for CM boards.