Configuring Dynamic Load Balancing

If existing load balancing configurations do not meet actual needs, configure dynamic load balancing.

Context

Usage Scenario

The router supports multiple load balancing configurations, including IP packet, VPLS, VLL, and trunk member interface-based load balancing configurations. If these configurations do not meet actual needs, configure dynamic load balancing to enable the router to dynamically adjust load balancing.

In VS mode, this configuration process is supported only by the admin VS.

Procedure

Configure dynamic load balancing adjustment for a trunk.
1. Run system-view
  The system view is displayed.
2. Run load-balance dynamic-adjust trunk enable
  Dynamic load balancing adjustment is enabled for a trunk.
3. Run commit
  The configuration is committed.
  
  To modify key parameters for dynamic load balancing adjustment of a trunk, perform the following optional steps.
4. (Optional) Run slot slot-id
  The slot view is displayed.
5. (Optional) Run load-balance dynamic-adjust trunk { scan scan-period | cpu cpu-threshold | cpu-detect cpu-detect-period | cpu-restore cpu-restore-threshold | statistics statistics-period | precision precision-threshold }
  Key parameters are configured for dynamic load balancing adjustment of a trunk.
6. (Optional) Run commit
  The configuration is committed.
Configure dynamic load balancing.
1. Run slot slot-id
  The slot view is displayed.
2. Run load-balance dynamic-adjust enable
  Dynamic load balancing is enabled.
3. Run commit
  The configuration is committed.