Configuring a Multicast Profile

To authorize multicast users, you must bind a configured multicast list to a created multicast profile.

Context

You can bind a configured multicast list to a created multicast profile and configure authentication for multicast users.

Choose one of the following configurations as required:

Configuring a multicast profile on an IPv4 network
Configuring a multicast profile on an IPv6 network

Procedure

Configuring a multicast profile on an IPv4 network
1. Run system-view
  The system view is displayed.
2. Run aaa
  The AAA view is displayed.
3. Run multicast-profile profile-name
  An IPv4 multicast profile is configured and the IPv4 multicast profile view is displayed.
4. Run multicast-list { name list-name | list-index start-index end-index }
  An IPv4 multicast list is bound to the IPv4 multicast profile.
5. Run authentication
  IPv4 multicast user authentication is enabled.
Configuring a multicast profile on an IPv6 network
1. Run system-view
  The system view is displayed.
2. Run aaa
  The AAA view is displayed.
3. Run multicast-profile ipv6 profile-name
  An IPv6 multicast profile is configured and the IPv6 multicast profile view is displayed.
4. Run multicast-list ipv6 { name list-name | list-index start-index [ end-index ] }
  An IPv6 multicast list is bound to the IPv6 multicast profile.
5. Run authentication
  IPv6 multicast user authentication is enabled.

Parent Topic: Configuring Multicast Control

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic Next topic >