(Optional) Configuring an Interface to Transparently Transmit HVRP Packets

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface gigabitethernet interface-number

   The GE interface view is displayed.

3. Run portswitch

   The working mode of the interface is switched to the Layer 2 mode.

4. Run stp enable

   STP is enabled on the interface.

5. Run hvrp-transport

   The interface is configured to transparently transmit HVRP packets.

   

   The command is supported only in the multi-instance scenario rather than the multi-process scenario.