Multicast NAT Configuration
Only the NetEngine 8000 F1A supports multicast NAT.
- Configuring Multicast NAT
- To translate the source IP address, destination IP address, and UDP port number of input multicast streams, configure multicast NAT.
- Configuring Clean Switching of Multicast Streams in Multicast Groups
- To translate the source IP addresses, destination IP addresses, and UDP port numbers of multiple input multicast streams in multicast groups, configure clean switching for the multicast streams.
- Configuration Examples for Multicast NAT
- This section provides examples for configuring multicast NAT. Each configuration example includes networking requirements, configuration roadmap, data preparation, configuration procedure, and configuration files.