Configuring Multicast NAT on an Outbound Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number

   The view of the outbound interface of multicast streams is displayed.

3. Run multicast-nat outbound id outbound-id [ name outbound-name ] [ src-mac auto-translate ] [ src-ip source-address ] [ dst-ip destination-address ] [ src-udp-port source-port ] [ dst-udp-port port ] [ rtp-ssrc auto-translate ] [ rtp-sn auto-translate [ rtp-ext-sn auto-translate ] ]

   A source IP address, destination IP address, and destination port number are specified for post-translation multicast streams.

4. Run commit

   The configuration is committed.