NAT64 Configuration
This section describes basic concepts and deployment of the Network Address Translation IPv6-to-IPv4 (NAT64) and functions supported by NAT64 Carrier Grade NAT (CGN) devices.
NAT is only supported on NetEngine 8000 F1A.
- Configuring Basic NAT64 Functions
- This section describes how to configure basic NAT64 functions.
- (Optional) Configuring Centralized NAT64 Translation
- This section describes how to configure centralized NAT64 translation.
- Configuring Access to an Internal IPv6 Host Using an IPv4 Address
- Configuring internal host access through a public IP address allows external users to access internal users using the specified public IP address and port number.
- Configuring NAT64 ALG
- This section describes how to configure the NAT64 application level gateway (ALG) function.
- Configuring NAT64 Security
- Before configuring Network Address Translation IPv6-to-IPv4 (NAT64) security, familiarize yourself with the applicable environment, complete the pre-configuration tasks, and obtain the data required for the configuration.
- Configuring NAT64 Maintainability
- This section describes how to configure the NAT64 maintainability function.
- Adjusting NAT64 Performance
- This section describes how to adjust NAT64 performance.
- Configuration Examples for NAT64
- This section provides an example for configuring NAT64.