Monitoring the NAT Operating Status

You can use display commands to monitor the NAT operating status.

In routine maintenance, you can run the following commands in any view to check the NAT running status.

Run the display nat flow-defend command to check the configured rate at which the first packet is sent to create a flow for a user.
Run the display nat instance command to check the configuration of a NAT instance.
Run the display nat memory-usage command to check entry-specific memory usage on a NAT service board.
Run the display nat session aging-time command to check the configured aging time for NAT session entries.
Run the display nat session table command to check NAT session entry information.
Run the display nat statistics command to check NAT service statistics.
Run the display nat user-information command to check NAT user information.
Run the display nat server-map command to check server-map entry information about one or more internal servers.