After configuring a static NAT source tracing algorithm, check the configurations.
Procedure
- Run the display nat static-mapping static-mapping-id command to check parameters of the static source tracing algorithm with a specified ID.
- Run the display nat static-mapping { global-pool | inside-pool } pool-id command to check the public and private address pools of the static source tracing algorithm.
- Run the display nat static-mapping ipv4 ipv4-address command to check the mapping between private IP address and public IP addresses/port range calculated based on the static source tracing algorithm.
- Run the display nat static-mapping global-ipv4 command to check the private IP addresses of the static source tracing algorithm.